Re: HPE MSA 2050 iSCSI problems
Well, off the top, I would say that the MSA host ports don’t support the use of link aggregation. Instead, each MSA port gets an IP address and load balancing occurs via the host OS multipathing...
View ArticleRe: HPE MSA 2050 iSCSI problems
Great, thanks, I've been going round and round in circles trying to solve this.
View ArticleP2000 G3 iSCSI MSA Unable to create Vdisk
Hello All,My P2000 currently has one Vdisk and I am trying to add another Vdisk to perform a volume copy operation. The existing Vdisk consists of nine 600 GB SAS drives, including the spare, in a RAID...
View ArticleP2000 G3 iSCSI MSA Question
Hey All,I need to perform a volume copy. I think what I need to do is to expand the existing Vdisk, then create a new volume using the expanded space.Here is my problem: The current Vdisk is using 600...
View ArticleRe: P2000 G3 iSCSI MSA Unable to create Vdisk
Hi Vint,Keeping the final motive of doing a volume copy aside.What we are trying is to creat a new Vdisk, my assumption is that you have two controller in MSA.Try following and confirm the status :--a)...
View ArticleHp storageworks p2000
Hello guys i bought a hp storageworks p2000 but it doesnt have amy console or any cables with this , ( this is a old deice ,used one ) i want to practice hp storage devices if you guys can help me how...
View ArticleRe: Hp storageworks p2000
Hello,The user guide is really going to be your best friendhttps://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02006876First step is to figure out if you can get access to the controllers...
View ArticleRe: P2000 G3 iSCSI MSA Question
Hi Vint,I am from HPE Storage Team.It is not mandatory that the source and the destination volumes should be in the same Vdisk, so you can create another vdisk using the 1.8TB drives and proceed with...
View Articlecant connect to smu san hp p2000
hello. i have san hp p2000 but i have not password so i ressetfactory by serial cable and now i cant see gui web base to config it
View ArticleRe: cant connect to smu san hp p2000
Looks like IP address got back to factory default. Please find below information,"Each controller has the following factory-default IP settings:• DHCP: enabled• Controller A IP address: 10.0.0.2•...
View ArticleRe: cant connect to smu san hp p2000
i connect to san by serial and set ip address....i can ping san ip address and when i connect to san with fast ethernet i cant config by web base or gui san
View ArticleRe: cant connect to smu san hp p2000
Are you able to open SMU with new IP or not?If you are able to open SMU from both controllers and provide user id/password then what error you get? If possible provide screenshotAre you able to SSH to...
View ArticleRe: Vdisk reconstruct failed. Command failed. (error code: 1). (vdisk:...
Hello Gibbo2018,I got the logs and analyzed the same as well.Problem exists in drive at location 1.8. There are 90 medium error exist which is very high number and this drive will never allow vdisk...
View ArticleRe: cant connect to smu san hp p2000
when i connect to san by fast ethernet i can ping san ip address but when i type san ip address in my browser i cant see web base gui config
View ArticleRe: cant connect to smu san hp p2000
If you are able to ping IP then there is no issue with management access of the MSA controllers. It could be issue with something else like Web browser or your management system.Are you able to SSH or...
View Articlei cant connect to san with smu
i have san hp p2000.i set ip address and can ping san ip address with my pc in fast ethernet but when i browse san ip adress in my browser i cant see smu
View ArticleRe: cant connect to smu san hp p2000
i test with different laptop and different browsers and show error= "unable to connect"i set 192.168.2.100 on controller a and 192.168.2 gateway but controller b has not any ip address how i can...
View ArticleRe: i cant connect to san with smu
Kindly continue with the below forum and close this forum ,https://community.hpe.com/t5/MSA-Storage/cant-connect-to-smu-san-hp-p2000/m-p/7026118#M12355 Hope this helps!RegardsSubhajitIf you feel this...
View ArticleRe: cant connect to smu san hp p2000
Kindly follow the rest of the steps I have mentioned below,Try to assign new IP to Controller B as well and check access. Need to confirm if same issue on both controllers ?Are you able to SSH or...
View Article