Re: P2000 MSA - The enclosure is degraded
Hy, my friendIf you issue the command show enclosure-status, you will have a great chance of finding the fault with greater detail, and there will also be a warning led on some component of the Storage
View ArticleRe: P2000 G3 iSCSI MSA Unable to create Vdisk
Thanks for your response. The reason for creating the vdisk is to make a volume copy. vd01 contains two volumes. Volume vd01_001 is 999.9 MB originally used as a witnes disk for my 2008 hyper-v...
View ArticleConverting RDM to VMDK - 5TB size, limited to several 1TB LUNs on EVA6300
So, I have a little dilemma. We have a file server that I need to migrate over to our new vCenter environment. This server has 4 RDM LUNS attached - 2 2TB, 2 500gb to be exact.Ive already done several...
View ArticleRe: P2000 G3 iSCSI MSA Unable to create Vdisk
As per my understanding with current configuration you will not be able to create Volume copy and the error that you are getting is as expected. Let me explain,vd01 Vdisk Size -> 4.2TBvd01_002...
View ArticleRe: cant connect to smu san hp p2000
my san has a one controller and i set ip address on controller a 10.0.0.1 and netmask 255.255.255.0 gateway 0.0.0.0 but i can ping controller a with my laptop via fast ethernet but i cant tellnet to...
View ArticleRe: cant connect to smu san hp p2000
Can you please provide the below command output,# show protocolsYou can also check if http, https, telnet and SSH enabled or not. If not then we need to enable it # set protocols http enabled https...
View ArticleRe: cant connect to smu san hp p2000
Good to know that issue has been resolved now.Kindly mark this forum as resolved so that others can get the update who are all following this. Hope this helps!RegardsSubhajitIf you feel this was...
View Articlehow make san storage emtpy
i bought san hp p2000 and it has vms and hosts and other thing . i want delete all and make san empty what shouild i do?
View ArticleRe: how make san storage emtpy
Try the below command,#restore defaults factoryKeep in mind that it will remove everything including installed License. Hope this helps!RegardsSubhajitIf you feel this was helpful please click the...
View ArticleRe: how make san storage emtpy
check the output,#show licenseIf you see any valure under "License Key" then there was license installed otherwise nothing was there.You can copy the same to notepad and save it.You should always refer...
View ArticleRe: P2000 G3 iSCSI MSA Unable to create Vdisk
Hi Vint,Yes, Seems spact is concern here ....Thumb rule is that apart from the volume capacity , you need atlest 20% of the volume size available in the Vdisk for the snap-pool to be created, the more...
View ArticleRe: how make san storage emtpy
i type #show license License Key: 00000000000000000000000000000000Maximum Licensable Snapshots: 512Base Maximum Snapshots: 64Licensed Snapshots: 64In-Use Snapshots: 0Volume Copy: EnabledReplication:...
View ArticleRe: how make san storage emtpy
No there is no license installed. Hope this helps!RegardsSubhajitIf you feel this was helpful please click the KUDOS!thumb...
View ArticleRe: how make san storage emtpy
if i set restore defaults factory on san storage then i can install vms and host and other thing on it later?
View ArticleRe: how make san storage emtpy
Yes it will be just like new system as it was in factoryYou can again reconfigure everything and can install VMs and other things as it is Hope this helps!RegardsSubhajitIf you feel this was helpful...
View ArticleRe: how make san storage emtpy
In order to understand about product, features and licensing you need to go through the Quickspec document as below,https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04168365For example, from...
View ArticleRe: how make san storage emtpy
what differ between restore default factory and local-only and prompt?
View Article