Re: Storage remains full
At the time of reply you can see just below the reply box there is one button called "Choose Files". You click on it and browse your files to attach it.Anyway I already replied technical things in my...
View ArticleMSA P2000 G3 performance
Hello,We have one msa p2000 g3 fc with 3 enclouser:P2000 has 12×600 15k sas ( raid 6)3×D2700 with 36×2TB 7.2k sas (raid 5)Also we have 6 hp dl380 g7 with esxi 5.5 and broacade san switch.About a month...
View ArticleRe: MSA P2000 G3 performance
Hello,For performance issues I always start basic and move up the chain.Is the firmware on the array, D2700s, and the harddrives all at the latest versions? While this can require a maintenance window...
View ArticleRe: MSA P2000 G3 performance
In order to troubleshoot Performance issue, there are many factors involved and it's not straight forward task. Some of the best practice to follow can be no hardware issue should exist, firmware need...
View ArticleA performance tier license is requiered to complete the operation - Add new...
Hello I've one MSA 1050 with one cage the last FW version.6 x SSD 400GBI create DG DGA01:10 x MDL 4TB (RAID6) Pool Abut When I try create this other DG: DGB016 x SSD 400GB (RAID6) Pool AShow me this...
View ArticleRe: A performance tier license is requiered to complete the operation - Add...
Yes, a performance tiering license is necessary if configuring both SSDs and HDDs as Virtual Disk Groups within the same system, not necessarily Pool. Without this license the system can be configured...
View ArticleRe: A performance tier license is requiered to complete the operation - Add...
You ar not alone.I have a lot of Customers who fall into the trap of "Tiering License",Because you need it in this Case, if you do Tiering or not.This is definitely the wrong name for this license.
View ArticleHPE P2000 G3 STORAGE - DISK REPLACEMENT AND VDISK REBUILD AFTER HARD DRIVE...
I need to know the correct procedure if I have a full capacity hard drive bays (12 X 600Gb HDD each) on RAID 5 and one of my Hard drives health is marked as Fault/Failed and degrated.
View ArticleRe: HPE P2000 G3 STORAGE - DISK REPLACEMENT AND VDISK REBUILD AFTER HARD...
Procedure would be simple,1> Replace the failed drive with new good drive with same type2> Configure this new drive as dedicated spare or Global spare. If your system having Dynamic spare setting...
View ArticleRe: HPE P2000 G3 STORAGE - DISK REPLACEMENT AND VDISK REBUILD AFTER HARD...
Will do and I let you know... Thank you.
View ArticleRe: Managed logs warning:
I have tooError 402 "managed logs wrapped a log region has wrapped and data has been lost"TechSupport, what make?
View ArticleCan a MSA 2050 get connected to d2700
I am migrating my MSA 2040 to MSA 2050 can i use my exisitng D2700 expansions with the MSA 2050 by changing the interconnecting cables
View ArticleRe: Can a MSA 2050 get connected to d2700
Yes, but please follow this guide: https://h20195.www2.hpe.com/v2/getpdf.aspx/a00038086enw.pdfBig caveat is that if you plan to do this as part of a data in place upgrade, the you must be using Virtual...
View ArticleRe: Managed logs warning:
If you are not sure about "managed logs" option then please disabled this option to stop receiving these events or alerts. Please find the procedure to stop this from SMU,To enable or disable managed...
View ArticleRe: Managed logs warning:
If your managed logs are wrapping that fast there is something that needs to be investigated. Typically the managed logs generate events and alerts at a rate that causes the logs to be generated every...
View ArticleMSA 1050 1GbE scenario
Hi all, I've a question in regards of the scenario attached, could works?Can I connect all port of the severs in order to interpose a switch to manage the iSCSI to the SAN?Let me know you...
View ArticleRe: MSA 1050 1GbE scenario
Direct Connection via iSCSI is supported in principle, but it does depend on the OS and whether a hardware initiator will be used. For example, VMWare do not support Direct Conenction over iSCSI except...
View ArticleHPE MSA 2050 iSCSI problems
I hope someone can help!We have a HPE MSA 2050 configured for iSCSI with 4 ports enabled, 2 from each controller.These connect into a bridge aggreation group on a HPE FF 5700.We also have 5 HPE GEN10...
View ArticleRe: MSA 1050 1GbE scenario
Thank's for a quick response.I'm using HPE server DL 360 Gen9 and the scope of the SAN MSA introduction is to have a Storage for a Microsoft 2012 Failover Cluster with SQL and shared memory.This...
View ArticleRe: MSA 1050 1GbE scenario
Yes, supported. Refer to page 5 of the relevant matrix within SPOCK by cross referencing the OS and array. I can't attached a PDF here so there is a screenshot instead. Regards,
View Article