Re: MSA2040 SAS Expand RAID6
Hi did you get a response? I am getting the same error trying to expand a RAID 10 vdisk fron 4 to 8 disks. Any help appreciated I'm new to HP storage - and going off it rapidly!! expand vdisk disks...
View ArticleMSA 2040 expand RAID 10 VDISK - help
I am getting an error trying to expand a RAID 10 vdisk fron 4 to 8 disks. Any help appreciated I'm new to HP storage - and going off it rapidly!!The GUI only lets you assign a max 4 disks to a RAID 10...
View ArticleRe: MSA 2040 expand RAID 10 VDISK - help
Furthermore, when trying to create a RAID 10 vdisk via CLI with more than four disks: 8, I get this error: # create vdisk level r10 disks 1.13-20 dgA01-r10Error: RAID10 and RAID50 require an equal...
View ArticleRe: MSA 2040 expand RAID 10 VDISK - help
From the guide: The expansion capability for each supported RAID level is: RAID level Expansion capability Maximum disks NRAID...
View ArticleRe: cant login to msa2000 via SSH ( blank screen via web )
Was there ever a response to this?I have an MSA2000 which only presents a blank screen in the web browser. I have telnet access, but I'm not familiar with the interface and the browser is far more...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Hi all guyssomeone has any kind of update about this issue?Regards
View ArticleMSA 2040 and Active\Active Multipath with Round Robin load balancing policy
Hi,I'm unable to change the Load balance policy in my iSCSI connection. My san has 2 controllers, each with 2 ports. My server has 2 nics, each nic has a sperate IP subnet with a seperate dedicated...
View ArticleRe: MSA 1040 1Gbit Dual Controler - MPIO Round Robin - invalid parameter
Did you ever get to the bottom of this? I have exactly the same problem only on an MSA 2040 and am keen to find out. ThanksJames
View ArticleP2000 Firmware problems
I am having a problem with controller A showing a different release than controller B. I cannot ftp to controller A and cannot login via the web interface., only using controller B. It seems that the...
View ArticleRound Robin Load balancing algorithm not available
Hi there,I'm unable to change the Load balance policy in my iSCSI connection or in device manager for my Multi Path disks I have configured. . My san has 2 controllers, each with 2 ports. My server...
View ArticleRe: Round Robin Load balancing algorithm not available
Just as an update, when I query the MPIO Microsoft DSM software the supported load balance policies is missing the Round Robin (RR) It says thisMPIO Disk1: 06 Paths, Round Robin with Subset, Implicit...
View ArticleHP P2000 Need to configure SMI-S to unencrypted
Hi All,I need to configure HP P2000 monitoring by scvmm 2012 following step by this link.https://hikmatkanaan.wordpress.com/2012/07/15/adding-hp-p2000-g3-iscsi-storage-provider-to-scvmm-2012/I must...
View ArticleP2000 G3 not updated firmware on one controller.
P2000 G3 not updated firmware on one controller.# show versions Controller A Versions --------------------- Bundle Version: TS252R007 Build Date: Fri May 8 15:40:57 MDT 2015 Controller B Versions...
View ArticleRe: P2000 G3 not updated firmware on one controller.
Did you start the update recently?How? To update the single controller, disable PFU (partner firmware update) in settings, then use the GUI firmware page to update, this updates the controller you are...
View ArticleRe: P2000 G3 not updated firmware on one controller.
Yesupdatedrecently. After the updateit's beenlonger than 12 hours. UpdatedviaGUIdownload from the HP website(OnlineROMFlashComponentfor Windows -HPP2000G3 MSAArrays).Controller is in the state...
View ArticleRe: MSA 2040 and HP Proliant Hard Disk Drives
Excerpt from QuickSpecs HP MSA 2040 Storage -c04123144 — DA – 14603 Worldwide — Version 11 — March 30, 2015"HP MSA 2040 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and HP MSA SFF...
View ArticleP2000G3: Remove all disks from Vdisk without loosing data?
Hi all,I've got a P2000 G3 with one Vdisk that consists of 12 hard drives with 2TB each. I now would like to replace those drives with 4TB ones. However, in case something goes wrong I would like to be...
View ArticleRe: Questions regarding - HP Storage MSA 2040 SAS Arrays Halted Support of...
Does the new HBA driver (6.0.0.114-1 - 17 Dec 2015) provide a fix for this issue? It appears to address the rescan issue, but I'm not sure if this would also address the problem with reviving dead...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
I see a new vSphere driver has just been released for the H241, which appears to address issues with scanning for new devices (and hopefully reviving dead paths).I'd love to hear from anyone that can...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Andy-h,We've bagged the MSA/SAS configuration (this whole mess was the final nail in the coffin for that - though to be completely honest, we never really liked it anyway) and gone to the small 3PAR...
View Article