Re: P2000 extremely slow http/https
after upgrade went into the same problem.restart mc boththat solved it.
View ArticleUpgrade firmware P2000 G3 SAS
Hello,I'm having an 2 HP P2000 G3 SAS storage. And it has the following error :218CAPI_EVENT_SUPERCAP_END_OF_LIFE"SuperCap End of Life" ); I read that an firmware update could resolve the issue.But the...
View ArticleRe: Upgrade firmware P2000 G3 SAS
Unfortunately a lot of that P2000 firmware is locked down by HP (or HPE or HPEnterprise, whatever they call themselves now), unless you have a valid support contract with them covering the unit in...
View ArticleMSA2324FC Largest 15K SAS Drive Available
We currently have an MSA2324FC using 300GB 15K SAS Drives. I need to increase the size of the drives and I am trying to find out the largest capacity drive that is approved at 15K? When looking at...
View ArticleFirmware for HP StorageWorks 8/24 SAN Switch
Hi All!I'm a little confused during digging on the HP website and googleCan anyone point me to place in the web where I can find firmware 6.4.3for HP StorageWorks 8/24 SAN Switch (see attachments)I...
View ArticleRe: Firmware for HP StorageWorks 8/24 SAN Switch
Go to SPOCK and get the information about the latest supported firmware for the switches https://h20272.www2.hp.com/spock/ then go to www.hpe.com -> support for the bits.
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Hi GuysI've installed ESXi 6.0 U1 Release 3073146 on a HP DL380 G9 with a H241 and a MSA 2040 over SAS.I do not see any Problems. I can expand Volumes and new Volumes get automaticly discovered.I've...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
- since moving to the new HPE Community, I've stopped getting email notifications and I missed your reply. I'm sorry!Speaking as an HPE employee, I've never been more frustrated (and embarassed)...
View ArticleP2000 coad load failure after firmwarer upgraded
i Just updated firmware of P2000 but i got failure as belowCode load failurestarting message serverSTATUS : Code Load Failurethe application is not able to communicate with thestorage controller....
View ArticleRe: P2000 coad load failure after firmwarer upgraded
HiIf you did the upgrade from the smart component it need to have accessto both controllers check if you can ping both controllers.Regards
View ArticleMSA2324i G2 LEFTOVR drive oddity
Hi folks,MSA2000i, firmware M114P01 (latest G2 I think) failed a drive in one of its R5 vdisks, electrical death so it just disappeared from the SMU and CLI. I replaced it with a similar 300gb drive...
View ArticleRe-using an HP P2000 G3 SAN on the local LAN
We presently have an HP P2000 G3 SAN being used with VMware.It has its network configuration done such that its SAN traffic is on a separate VLAN etc. wrt VMware.Later on when this P2000 SAN is...
View ArticleVDisk expanding on a SAN
Dear people, We have a SAN with x counts of disks and we put 2 more extra in the SAN.Now i know how to expand the VDISK01, but i want to know what is the impact. IS it possible to expand in an live...
View ArticleFirmware updates on MSA2000 G3 contoller without network management port. How...
We apperently have 1 dead mgmt port on Controller B. We were able to upload and configure controller A to the newest firmware TS250P003.How can we go about deploying the updated firmware to controller...
View ArticleRe: Firmware updates on MSA2000 G3 contoller without network management port....
Hiyou can not do upgrade from usb port this is a serial managment portyou could check if partner firmware upgrade is enabledand see if you re-insert the controller with a problem if the controllers...
View ArticleOS Upgrade on server with existing MSA2012fc
HiWe have a Hp server running W2003 (32 Bit ) connected to a MSA2012fc with 2 enclosures preseting 2 virtual drives D and E on the serverThe firmware on the MSA is J202P01 which supports w2008 x64We...
View ArticleRe: OS Upgrade on server with existing MSA2012fc
Hi,first have a good Backup.Then shutdown the Host, disconnect the FC until everything is installed including the MPIO configuration.Now attach FC take the Disks online and everything should be fine.
View ArticleRe: Firmware updates on MSA2000 G3 contoller without network management port....
Latest version is TS252R007 http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5111373&swItemId=MTX_1af540c14b3c40beb4089286a5&swEnvOid=4064
View ArticleClik here to view.
Repairing YM-3591AAR power supply (HP P/N 81-00000051)
We have had a HP P2000 G3 drive array system since 2010. In 2014, one of its power supplies failed and we bought a new one for about 250 USD (the system wasn't covered by warranty anymore). But this...
View ArticleRe: Firmware for HP StorageWorks 8/24 SAN Switch
For those which still searching for this firmware:http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=5111498&swLangOid=8&swEnvOid=54Best regards!Artur Debski--http://blogit.one.pl
View Article