P2000 G3 https unavailable after firmware upgrade
I upgraded my P2000 G3 to the latest firmware and https is unavailable. I enabled http from cli, this works fine. I have run create certificate unique and restarted both managment controllers. This is...
View ArticleMSA 2040 Reliability
Hello,We have purchased a MSA2040 SAN with 4x 16Gbps FC and 4x HP SN1000Q 16GB HBAs to be integrated in 2 servers (2 HBAs each).It is evident that the new Thin Provisioning feature is very interesting...
View ArticleRe: P2000 G3 https unavailable after firmware upgrade
I have seen the same recently. Firefox and chrome doesn't work, but IE does.I don't know about a solution, bit IMHO the reason is the protocol used.
View ArticleRe: MSA2040 qla2xxx abort commands
Nobody the same issues? In the meantime I updated the qla2xxx driver on the xen machines to the latest version, but no luck. Here is some additional output of the driver, maybe it helps:...
View ArticleRe: Controller Failure - P2000 G3
Thanks Torsten, appreciate all the help. Adding ports online worked without a glitch.
View ArticleRe: Gadget Serial v2.4 Driver for P2000
Today in November 2015the drivers have been moved and I still can't find them!
View ArticleRe: MSA2040 qla2xxx abort commands
Hello, We are observing the same issues at present. We've had the entire MSA 2040 replaced by now and the issue persists. Have you tried the latest firmware for your HBA? I'm guessing we're using the...
View ArticleRe: Gadget Serial v2.4 Driver for P2000
Just follow the link above and the redirect: http://h20566.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_b2dca32228bf4aad946bfe9fcd
View ArticleP2000 - SQL Server could not connect to SAN
Hi, We had a period where our SQL Server could not connect to its DB hosted on our P2000 SAN. We were getting iSCSI Errors like this on the SQL Server: "Provider Name: iScsiPrtThe description for Event...
View ArticleRe: MSA2040 qla2xxx abort commands
We have different Controllers (qle2462, qle2562) , but all Qlogic qla2xxx from dell.I tried to upgrade and load the latest firmware (8.01.02) on the qla2562 card, but the result is the same.The other...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Hey there, could you find out any more regarding this thread?Issue being MSA2040 + SAS + Gen9 ServerI mentioned it to you breifly when you were in Auckland a few months back Thanks
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Folks,Got an update yesterday on this whole deal. Turns out between HP and VM there are no less than 5 fixes they are working on for this whole Gen9/SAS/MSA/VM issue.No word yet on when the fixes will...
View ArticleRe: cant access Mgmt in SAN (EVA 4400 HSV300-S)
Hi, I just had the same issue and reseating the management module fixed it for me :) thanks.
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
I am glad I found this post. I am in the same boat as most here. We have several DL360 G7's connecting to a P2000 SAS as well. We are currnetly running vSphere 5.1 and the setup has been higly...
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
Hi,this is not an Gen9 thing.This is an Smart Array x4x thing. (all Gen4 Smart Array Adapters)I have the same issue with other SA x4x Adapters. As Workaround i use H221 HBA's in the Gen9 Servers and...
View ArticleRe: DL380 & P2000 G3 MSA SAS
Hello Torsten,I am encountering a similar issue. I have a ProLiant DL380p G8 with eight on board drives which I have configured via the SSA.The Server has two PCI H221 HBA where I attached two MSA 60...
View ArticleRe: DL380 & P2000 G3 MSA SAS
>> according to this post the storage needs to be configured via the MSA SMU? Yes, connect to the management ethernet port of the controllers, point your browser to the array IP and you get...
View ArticleRe: MSA 2040 Automated Tiering
I'm in the same boat, only i have 19 SAS, 5 SSD.So i configured:1 x Raid 5 with 9 SAS disks & 3 Raid-5 SSD disks on Pool A1 x Raid-5 with 9 SAS disks & 2 Raid-1 SSD disks on Pool B1 x Global...
View ArticleMSA AutoTiering V2
Hi,This post is very simular to 'MSA 2040 Automated Tiering' but i have a few more questions, so appologies.I have 19 SAS disks and 5 SSD drives.My best guess is to setup the following:A : 9 sas disks...
View Article