Re: HPE MSA 2050 Storage Capacity not refreshed in Server 2016 after removing...
Please note that dg01 and dg02 both are actually Virtual Disk Groups (VDG) but you have presented volumes which you have created from Pools.In MSA2050 the architecture is couple of drives create VDG....
View ArticleRe: HPE MSA 2050 Replication Errors
HelloI'm having the same problem and I got the same error:Scheduler: The scheduler was unable to complete the replication. - An internal timeout has occurred.Each MSA firmware versions are...
View ArticleRe: HPE MSA 2050 Storage Capacity not refreshed in Server 2016 after removing...
Dear Mr. Subhajit,Thank you for your kind reply,Pardon, I want to ask, you said ... until you modify the same manually, how modify it manually? From Host menu in SMU ?Thank you.
View ArticleRe: MSA 2050 Disk Group - physical separation
In MSA 2050 a volume is carved out of all disk groups that are part of the Pool. Unfortunately, there is no option to create volumes out of dedicated disk groups. Linear vdisks in previous version MSAs...
View ArticleRe: FORGOT PASSWORD FOR HPE MSA 2050
Dear Team,This issue has not been resolved.I tried all the suggestions above but couldn't resolve the issue at hand.Thank You
View ArticleRe: FORGOT PASSWORD FOR HPE MSA 2050
If the suggested steps failed to resolve the issue the only option would be to replace both the controllers simultaneously after scheduling a down time.Please log a support case with HPE support team...
View ArticleRe: MSA 2050 Disk Group - physical separation
Thank you for the quick reply.Could I reuse the SAS attached disk shelves and directly connect them to a physical Windows server as JBODs ?I have 7 of them for each SAN.Many thanks.
View ArticleRe: MSA 2050 Disk Group - physical separation
It depends on the model number of disk enclosures that was shipped with the MSA 2050 and the server model.MSA 2050 disk enclosures are not compatible with HPE proliant servers.D2000 series disk...
View ArticleRe: MSA 2050 Disk Group - physical separation
Thank you for the reply.So what would my options be ? 1, Buy MSA 2040 controllers ? , Regards
View ArticleRe: MSA 2050 Disk Group - physical separation
Hello,In order to create seperate systems you could swap out the JBOD IOMs with controllers. At that point you could create a Disk Group per pool and one volume (LUN) per pool. This would give you two...
View ArticleRe: HPE MSA 2050 Storage Capacity not refreshed in Server 2016 after removing...
As per my understanding if your requirement is to reduce the volume size or shrink the volume size then that is not possible. Please find the same captured from SMU guide,"You can change the name and...
View ArticleRe: Swapping out a failed MSA2324sa AJ807A controller with a used one
If there is no valid data currently stored on the array from where you want to remove controller, you delete the volumes and vdisks first, then run the factory restore defaults command. I would then...
View ArticleMassive issues with MSA2050
Good Morning,I have a big problem with our MSA 2050, we have suddenly noticed that we are not able to create new volumes on our storage. After hours of research we have logged a call to HP but in mean...
View ArticleRe: Massive issues with MSA2050
Snapshot Space -------------- Pool: A Limit (%Pool): 10% Limit Size: 20.1TB Allocated (%Pool): 1.5% Allocated (%Snapshot Space): 14.8% Allocated Size: 2975.4GB Low Threshold (%Snapshot Space): 75%...
View ArticleRe: Massive issues with MSA2050
show disk-groupsName Size Free Pool Tier % of Pool Own RAID Disks StatusCurrent Job Job% Sec Fmt Health Reason Action--------------------------------------------------------------------------dgA01...
View ArticleRe: Massive issues with MSA2050
# show poolsName Serial Number Blocksize Total Size Avail Snap SizeOverCommit Disk Groups Volumes Low Thresh Mid Thresh High ThreshSec Fmt Health Reason...
View ArticleRe: MSA 2050 Disk Group - physical separation
The chassis of MSA 2050 is not listed under spare parts list of MSA 2040.Shawns suggestion would work.
View ArticleRe: Massive issues with MSA2050
Do you have replication configured?Can you please provide below output,show volumesMSA 2050 max no of volumes supported 512 and max no of snapshot supported 512 so you need to check how many total...
View ArticleMSA 2040 disk spare failed
Hi,I have MSA 2040. I have disk damage and I follow this description.https://www.stephenwagner.com/2017/01/27/hpe-msa-2040-disk-failure-considerations-and-steps/I do what is described in point two and...
View ArticleRe: MSA 2040 disk spare failed
What is Controller firmware version running ?How many total drive present in this system?How many vdisks present in this system?Did you verified if any other drive part of same vdisk vd02 having...
View Article