Clik here to view.
Re: HELP, Replacement P2000 G3 Smart Array messed up Firmware!
I don’t know our SAID?I just noticed that controller (A) has a newer firmware of TS251P006-02 than Controller (B) which is on TS250P003This is how it looked before the replacement controller (a) was...
View ArticleRe: HELP, Replacement P2000 G3 Smart Array messed up Firmware!
Hi Mr.Walker,I will not recommend a roll back or upgrade till the array status has been checked.Controller B seems to be at different MC and SC firmware versions as per the screen shot shared.You could...
View ArticleHPE MSA 2050 SAN Reserved Storage Utilization
Hi All,Our storage is showing that it has 19 TB reserved. As we are pretty much in a good shape and dont need that storage but on this coming saturday we have an activity and for that we want some...
View ArticleRe: HPE MSA 2050 SAN Reserved Storage Utilization
Hi Yazdan,I see that it is MSA 2050 SAN and you are worried about 19TB space reserved.I would like to understand the configuration of your unit?Especially the virtual volume were space is reserved.What...
View ArticleRe: HPE MSA 2050 SAN Reserved Storage Utilization
Reserved space refers to space that is unavailable for host use. It consists of RAID parity and the metadata needed for internal management of data structures.Hope you mean this space. You can also...
View ArticleRe: move a P2000 G3 to a different datacenter/network??
Those commands are just what I need. Document everything, connect via ssh/telnet, run the command, done.Then take SAN to new location, perform setup anew from 'scratch', all should be well.Thank you, Tom
View ArticleRe: move a P2000 G3 to a different datacenter/network??
Yes your understanding is correct.Also request you to mark the forum as resolved if there is no more outstanding query from your end on this issue. This will help for everyone who are all following...
View ArticleRe: move a P2000 G3 to a different datacenter/network??
Hello,Subhajit has very accurately described the process to restore the array configuration to default values. This will allow you to use the Configuration Wizard to set up the system. However, be...
View ArticleMSA 2050 - ICMP Drop and LUN Config
HiWe have just setup a 2 node W2019 cluster (Fully Patched/Latest Drivers connected with 2 x DL360 Gen 8 servers to a MSA 2050 ISCSI (8 x 1GB, 4 Per Controller) Following the best practice guide....
View ArticleFORGOT PASSWORD FOR HPE MSA 2050
Hi, kindly assist with resetting login details for HP MSA 2050.The defaults password were changed from manage to something else but we can't seem to remember the new login details. Please kindly assist...
View ArticleMSA2050 - How to get a proper certificate from Microsoft CA
Hi, I can't find how to change HTTPS certificate from MSA controller, replacing the self signed cert by a Microsoft Certificate Authority trusted cert.To get a certificate from my CA, i need a...
View ArticleRe: MSA 2050 - ICMP Drop and LUN Config
You can check what is the load balance policy configured. It should be Round Robin MPIO policy.If you have done Default Mapping then all Host should be able to access all volumes. Hope this...
View ArticleRe: FORGOT PASSWORD FOR HPE MSA 2050
Password recovery would probabvly not work if the MSA firmware version is VL100 version. Try the below mentioned steps:Connect USB serial cable to the controller.Use Terra Term or another similar...
View ArticleRe: MSA2050 - How to get a proper certificate from Microsoft CA
You will have to work with you CA to create the customer certificates that will be specific to your domain. HPE cannot provide you those custom certificates.Please refer to the SMU Guide for general...
View ArticleSwapping out a failed MSA2324sa AJ807A controller with a used one
Hi folks. We have a pair of MSA2324sa's in a small testing lab which are out of support. Both are active and running with separate disk configurations, however we no longer require the second one...
View ArticleMSA 2050 Disk Group - physical separation
Hi, Just got 2 new FC MSA 2050s maxed out disk shelves to run a Hyper-V cluster. Due to security regulations, there is a physical disk separation requirement for separate project data. eg: Projec1 on...
View ArticleRe: FORGOT PASSWORD FOR HPE MSA 2050
Can you please help us to understand if the issue got resolved or not?If issue got resolved then how?This will help for everyone who are all following your forum.If you feel this was helpful please...
View ArticleHPE MSA 2050 Storage Capacity not refreshed in Server 2016 after removing...
Dear all,I want to ask about these, since I'm a newbie for these kind of thing,I manage a DL 560 Gen10 and a MSA 2050dg01 = 6 sas x 900GB (Raid 5) = ~ 4,500 GBdg02 = 2 sas x 900GB (Raid 1) = ~ 900...
View ArticleDisable TLS1.0 on HP-MSA-1040
We have an HP-MSA-1040 SAN that our software has identified is using TLS1.0. that is insecure I cannot see a way to disable TLS1.0, and haven't been able to find any instructions to do it. Can anyone...
View ArticleRe: Disable TLS1.0 on HP-MSA-1040
What is the MSA Controller firmware version that is installed now?Please check the below link and update firmware to latest version,https://h41111.www4.hpe.com/storage/msafirmware.html Hope this...
View Article