Re: Event ID: 58 - Disk detected error
Hello,I am facing the same issue on my MSA2012FC: how did you remove (or replace) the disk if it was not in a failed status?Best Regards.
View ArticleHP MSA2312 Dual controller
Hello,Recently we have a disk failure in enclosure 3 slot 3 of HP MSA2312FC storage device. It was replaced now but still we are getting events that "Disk Channel error in encl 3 slot 32". And we are...
View ArticleIPv6 Unique Local Addressing on MSA 2050
Hello, I have looked around but can't seem to find any user documentation for the MSA 2050 SAN. Our management network is on a Unique Local IPv6 Subnet (Per RFC 4193...
View ArticleRe: IPv6 Unique Local Addressing on MSA 2050
Here is MSA Storage Information Library Link: http://h17007.www1.hpe.com/us/en/storage/info-library/index.aspx?cat=msa&subcat=MSA_1040+MSA_1050+MSA_2040+MSA_2042+MSA_2050+MSA_2052&lang=1 You...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
I realise this is an old post but I have been looking at this myself recently and found this https://communities.vmware.com/thread/536168 which explains the restriction - Vmware have not provided...
View ArticleRe: IPv6 Unique Local Addressing on MSA 2050
According the MSA_2050 Technical Overview (from SABA and Webinars) the following can be found at the FAQQ: Is it possible to use IPv6 on the management ports?A: Like the MSA 2040, it is not supported....
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
Can you explain it? That link doesn't seem to be working.
View ArticleRe: HP MSA2312 Dual controller
Generally this error comes due to IO module issue........may be you can check if all drive enclosure IO module hardware error free or not.........you can try below options,1> Take a downtime and...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
I have found one important response from HPE product specialist in Vmware forum as below,https://communities.vmware.com/thread/536168 Apart from the above you can refer the below links as...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
Thanks . I don't know why 's VMTN link doesn't work. It appears to be the same URL.I went ahead and replied there, and I'll repost part of my reply here:I'd like to point out that other storage vendors...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
Hello againI do actually use this setup- direct connection to an HP MSA and it does work. However, I have found that I do not get failover to the other controller if I simulate a nic failure at the...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
Oh, and BTW - apologies for the link - I just checked and there was a space at the end!
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
So when you unplug that cable, do you lose access to the storage entirely? How many paths does the host see for each LUN?I would expect failover to work, because HPE does support direct-attached iSCSI...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
: I just checked and there was a space at the end! You can edit it using Post Options > Edit Reply and click on the hyperlink menu (chain).And you can delete your followup post.
View ArticleRe: MSA 2040
The same here. I cleared logs via CLI but it did not helped. Every hour I am getting the same message. Please , a need to get rid off it.Event: Managed logs: A log region has reached the level at...
View ArticleMSA 2042 oand MSA 2040 getting event infomration every hour
I cleared logs via CLI but it did not helped. Every hour I am getting the same message. Please , a need to get rid off it.Event: Managed logs: A log region has reached the level at which it should be...
View ArticleMSA 2050 wrong disk in disk group
Hello,MSA2050 VL100R004Our disk group contains 10 disks ( 9 x 1,2 Tb disks and 1x 600Gb disk) the 600 gb disk is the black sheep , so the whole disk group in raid6 uses 600 Gb for all disks ...How can...
View ArticleRe: MSA 2050 wrong disk in disk group
I'm pretty sure your only option is to delete the disk group and recreate it. If the pool, that the vdisk is in, has multiple disk groups then the system will attempt to drain the disk group to other...
View ArticleRe: MSA 2050 wrong disk in disk group
Thank's Mike, We have 2 diskgroup DGA1 and DGA2 with a volume split on the two.BTW i'll log a case to HP to see if there is a solution without destroyint the data
View ArticleRe: MSA 2050 wrong disk in disk group
No problem. I'm guessing, by your reply, that there isn't enough space in the other disk group to hold both? If there were then it's pretty easy. However, since you are saying it is split then I'm...
View Article