Re: what the right solutiion in my case
We talk about fibre channel, not ethernet, right?If you have more than 4 servers, you need a fibre channel switch, better 2 for redundancy, e.g. HPE B-series SAN switch.
View ArticleRe: what the right solutiion in my case
Hello,thanks for your replay, yes we talk about fiber channel so the network will be server 1 server 2 server3 server4...
View ArticleRe: what the right solutiion in my case
unless you use FCoE somewhere, you build with fibre channel a SAN, not a LAN or VLAN.
View ArticleRe: what the right solutiion in my case
sorry i didnt understand it's my first time working with hpe san solutions.
View ArticleClik here to view.
Re: what the right solutiion in my case
There is no VLAN in a fibre channel SAN.This is not specific to HPE.You will build 2 SAN fabrics, each consisting of a fibre channel SAN switch, where you connect one port of each server to each switch...
View ArticleRe: what the right solutiion in my case
Hello,there is no lan i want to get a hight performace when connecting to server.thanks.
View ArticleRe: what the right solutiion in my case
in this case:Switch 1 Connect to switch 2 on port 1 Switch 1 Connect to switch 2 on port 2server 1 fiber channel 1 will connect to switch 1 on port 3server 2 fiber channel 1 will connect to switch 1...
View ArticleRe: what the right solutiion in my case
>>Switch 1 Connect to switch 2 on port 1 Switch 1 Connect to switch 2 on port 2 No, there is no connection between the switches.
View ArticleRe: what the right solutiion in my case
so it will be : server 1 fiber channel 1 will connect to switch 1 on port 3server 2 fiber channel 1 will connect to switch 1 on port 4server 3 fiber channel 1 will connect to switch 1 on port 5server...
View ArticleRe: what the right solutiion in my case
You can connect any SAN equipment to the switch.You will use zoning on the switch and LUN presentation on the array to "isolate" the members of the SAN.
View ArticleRe: what the right solutiion in my case
in this case the performance will be hight ?the part number requied is:Storagex1 : hp 2040 k2r79a Server Cardx5: HPE SN1000q 16gb 2p FC HBASwitchx2 : HPE SN6000B 16Gb 48-port/48-port Active Power Pack+...
View ArticleI am getting the error message MSA 2312i device and i want to configuration...
Hi Support, I am getting the error message MSA 2312i device. i am unable to find the soluation. 2018-01-05 08:55:45 A9208562 217 Supercapacitor failure. Status: cell 2 voltage is too high (28), State:...
View ArticleRe: Configure Raid 1 with 6 HDDs
Did you want to have 3 disks in one mirror and 3 in the other?
View ArticleRe: I am getting the error message MSA 2312i device and i want to...
I have seen this multiple Times with an Old Firmware.Update the Firmware, if it dows not help, you need a Controller replace.HPE MSA Upgrade Guide
View ArticleSlow write operations on Storage MSA 1040
Hi,We have RAID5 mechanism configured & having huge write operations on storage. We have a mount point with 10TB size. There are huge write operations happening on this mount point. Normal the...
View ArticleRe: Slow write operations on Storage MSA 1040
Well, could certainly be a lot of things including MSA errors or stuff completely outside MSA (network, hosts, new patches applied, etc). Is this a single host that writes this traffic? Is it a VM? did...
View ArticleHardware compatibility - HP server & SAN MSA1000
Hi,We have this hardware:Servers: HP ProLiant ML350 Generation 5 (G5)SAN: HP StorageWords Modular Smart Array 1000 with Fibre Channel I/O Module.MSA (MSA1000, 2 controllers) <-> SWITCH <->...
View ArticleRe: Hardware compatibility - HP server & SAN MSA1000
Such an old device ...Quickspecs will list supported servers, mostly G2 to G4.https://www.islandco.com/quickspecs/msa1000_quickspecs.pdf
View ArticleRe: Hardware compatibility - HP server & SAN MSA1000
Torsten. wrote:Such an old device ...I know.Quickspecs will list supported servers, mostly G2 to G4.https://www.islandco.com/quickspecs/msa1000_quickspecs.pdfExtracted from quickspecs:Supports most...
View ArticleRe: Hardware compatibility - HP server & SAN MSA1000
Since there is no suppourt for this anyway, you should try. IMHO it will work.
View Article