Re: Replace both P2000 G3 MSA Systems Controllers at the same time
Yes, the Data will Stay, but the Controller config is lost.Because only the Raid and Volume Configuration is stored on the Disk.But if you have captured by CLI or Screenshots, I will typically recreate...
View ArticleRe: replication 2050 and 2060 settings and recovery
I am doing replication from 2060 to 2050 it's kinda easy.I will try to upload my doc
View ArticleNew MSA2060 with 12 x 1.92TB SSD SAS 12G - RAID Level?
Hi,i am new to HP MSA and now have a brand new MSA2060, Dualcontroller, 12 x 1,92TB SSD Drives.The MSA is connected with FC to two ESX Hosts (20 VMs)I´m interested in the best recommended Layout with...
View ArticleRe: MSA 2050 SNMP TRAPS
Hello Gaston, Please check the private messages that I have shared. You may log a support case for further assistance if any additional information/help is needed. Thank you
View ArticleRe: New MSA2060 with 12 x 1.92TB SSD SAS 12G - RAID Level?
Hi @Knaeckebrot ,MSA DP+ is the best option even for SSD/ESXi. Hope you will find this video useful to know more about the new DP+ RAID.https://www.youtube.com/watch?v=8wOn1LUv-bkThe virtual Storage...
View ArticleRe: New MSA2060 with 12 x 1.92TB SSD SAS 12G - RAID Level?
Hi, MSA DP+ is the recommended disk group configuration for an all flash array as per best practices guide. Read cache is supported only when the array has non-SSD hard drives.
View ArticleMSA 1040 - Overview of Bad Blocks per HDD
Good morning,We still have a number of MSA 1040s running with 600 Gb and 1.2 Tb HDDs.After a scrub job we regularly see in the System Events of the SMU, that a HDD has received one or more bad blocks...
View ArticleQuery: MSA 1040 - Overview of Bad Blocks per HDD
System recommended content:1. HPE MSA 1040 SAN Storage - Troubleshooting2. HPE MSA 1040 User Guide Please click on "Thumbs Up/Kudo" icon to give a "Kudo". Thank you for being a HPE valuable community...
View ArticleRe: Query: MSA 1040 - Overview of Bad Blocks per HDD
Hi Support_S,I'm awaire of those documents. On which pages can I find the answers to my questions?
View ArticleRe: MSA 2050 SNMP TRAPS
Hi:I can´t accept the answer received by PM.I have a circumstancial problem for which I can´t create a ticket to solve a problem that I believe that exists since the begining of the MSA devices...
View ArticleRe: MSA 1040 - Overview of Bad Blocks per HDD
Hi @JanKoster ,Monitor the error trend and whether the number of errors approaches the total number of bad-block replacements available.Please refer to the below event description guide for the...
View ArticleRe: MSA 1040 - Overview of Bad Blocks per HDD
Hi, Actually, I'm looking for a simple way to read the (SMART) information directly, as for example with the HPE 3PAR systems and Synology DiskStation's. There I can see per HDD what the number of...
View ArticleRe: MSA 1040 - Overview of Bad Blocks per HDD
Hi @JanKoster In the Configuration View panel, right-click an enclosure and select View, Overview. View information about the enclosure and its components in a front or rear graphical view, or in a...
View ArticleMSA2060 Initiator UP/Down all time
HelloWe have a MSA 2060 FC connected to 2 ESXI 8.0.1 physical Server. Both Server are connectet with 2 cable to the MSA:MSA A1 -> Server 01 Port 01 (with fiber cable)MSA A3 -> Server 02 Port 02...
View ArticleRe: MSA 1040 - Overview of Bad Blocks per HDD
Dear Sahana,Thanks for your comment. I am familiar with the Views you mentioned. When I look under "performance" I see under "Disk Error Counters"there are some errors in the recent time (e.g. last...
View ArticleRe: MSA 2050 SNMP TRAPS
@GastonAguilar Good day!Regarding the trap OID (.1.3.6.1.4.1.11.2.51.0.3001) that you are receiving frequently, but can't find in the msa2000traps-mib.mib file, there could be a couple of...
View ArticleRe: MSA2060 Initiator UP/Down all time
Hello@Trin_45,Please check the physical connections from both sides of MSA and server (any loose connections or damaged cables and SFPs) and Check the Data center temperature range should be between...
View ArticleRe: MSA2060 Initiator UP/Down all time
Hello @venkat_y Thank you for your reply.The physical connection is checked, everything looks good and cable already changed. The Data center temperature is between 10° and 35°.i found the following...
View ArticleRe: MSA2060 Initiator UP/Down all time
Hi @Trin_45 ,Error 235 indicates an enclosure management processor (EMP) detected a serious error.Recommended actions - Replace the indicated controller module or expansion module.Info - An enclosure...
View Article