MSA1060 SAS with two Vmware nodes on Cisco UCS C220 M5SX
Guys new to the this Device HPE MSA 1060 SAS. I have two hosts connected and they both can see the storeage.I created two raid 6 volumes one on controller A and one on B and assigned them to these...
View ArticleRe: MSA 2060 SAS - Red Hat 8 Multipathing
Thanks for pointing to the RedHat article. It's going in the right direction but is WRONG.First: Vendor is incorrect for Gen5 and Gen6 MSA arrays vendor "HP|HPE"Second: Product will...
View ArticleRe: MSA1060 SAS with two Vmware nodes on Cisco UCS C220 M5SX
Think we figured this one out. The two boxes we were using have two different sas cards in them. first one is aCisco 9400-8E 12 GB SAS-HBA The secon one has a LSI 9380-8E the LSI card was the one that...
View ArticleRe: MSA1060 SAS with two Vmware nodes on Cisco UCS C220 M5SX
Hello ,I was thinking that the host is unable to create VMFS fylesystem because of pre-existing LUN partitions.Thank you very much for confirming the resolution. This will be certainly helpful for...
View ArticleRe: MSA1060 SAS with two Vmware nodes on Cisco UCS C220 M5SX
Hi ,Thank you for the confirmation.Hope you may find these documents useful as...
View ArticleCannot Access SAN MSA 2040
HiWith my colleague, we have some difficulty to access to our SAN MSA 2040. Ping work but impossible to connect to the web interface... We try with serial cable on bothcontrollers but without much...
View ArticleRe: Cannot Access SAN MSA 2040
Hi ,Good day!Before proceeding further I would like to know a few things:What is the current LED status?Did you try using a new pair of cables?Is it a new installation or was there any scheduled...
View ArticleRe: Cannot Access SAN MSA 2040
- All led seems ok, just on the second controller one led is off (indicate ok) else nothing.- which cabkles you talk ? serial cable ? If you talk about this, yes we try 2 cables.We try to connect in...
View ArticleQuery: Cannot Access SAN MSA 2040
System recommended content:1. CUSTOMER BULLETIN: HP MSA 2040 SAN Storage - HTTP and HTTPS service access issue is identified2. HPE MSA 2040 User Guide Please click on "Thumbs Up/Kudo" icon to give a...
View ArticleRe: Query: Cannot Access SAN MSA 2040
I've already found this two documentations. Effectively our actual version is GL210R004 and the last version is GL225. But how we can do the upgrade without any access to the SAN ? (not fault to try by...
View ArticleRe: Query: Cannot Access SAN MSA 2040
Hi ,Thank you for the information.Looks like the system has been directly upgraded from version GL210R004 to version GL225. That is a large leap for the system to make.It is recommended to follow the...
View ArticleHP MSA Question
Hey there:I am inheriting a network (with little to no documentation, aside from passwords) that has an HP P2000 G3 MSA Storage array. On the back of the unit, it is connected via the fiber channel to...
View ArticleRe: Query: Cannot Access SAN MSA 2040
Hey We haven't do any upgrade, the version GL210R004 is what we have actualy and we want do the upgrade but we can't access to the SAN, by browser or by CLI so we are blocked...
View ArticleRe: HP MSA Question
Hi ,the default IP adress for management, you can login with manage / !manage10.0.0.2 (controller A) 10.0.0.3 (controller B)IP Subnet Mask: 255.255.255.0Gateway IP Address: 10.0.0.1
View ArticleRe: Query: Cannot Access SAN MSA 2040
Hi ,Apology, My analysis wasn't in the right direction.Here is the right document for your version of MSA firmware - https://www.hpe.com/psnow/doc/c03792054Please configure the SMU as instructed in...
View ArticleClik here to view.
Re: Query: Cannot Access SAN MSA 2040
Thanks for your answer. I have look the documentation, but the SAN refuse us the connection on SMU, it's even not possible to have the log page, it just refuse us (sorry it's in french). And by CLI...
View ArticleRe: Query: Cannot Access SAN MSA 2040
Hello ,In MSA 2040, fans in both the modules receive power through a common bus on the midplane. There are chances that it would have gone faulty. Can you please check that and confirm?Regards,Srinivas...
View ArticleRe: Query: Cannot Access SAN MSA 2040
Hello Thanks for your answer. For now i haven't notice any problem with fans, but i will check more in detail and i'll let you know.
View ArticleRe: MSA 2060 SAS - Red Hat 8 Multipathing
Hello,Thanks to both of you for all information, it works.
View ArticleRe: Query: Cannot Access SAN MSA 2040
Can you show an image of the serial connection?What serial cable are you using? the supported cable is the USB A to USB MiniYou may have to attempt connecting with one controller while the other is...
View Article