Quantcast
Browsing all 8325 articles
Browse latest View live

Degraded Health Issue

Hi GuysCould anyone help Recently we got Degraded error on our HP P2000 (P2000 G3 iSCSI)The error is showing in one of the encloser ( we have 2 encloser) i have attached document with screenshots...

View Article


Re: Degraded Health Issue

Connect to the Storage with SSH, and type in: show systemThis should show you the Problem, or post it here.

View Article


P2000 vdisk data recover

We have P2000 G3 array. Configured RAID5 vdisk. After some unforeseen circumstances there are two LEFTOVR drives in this vdisk. And vdisk in state OFFL. Is there are any method to recover our vdisk?We...

View Article

HP P2000G3 SAS Crasiest Bug EVER !

 i have a server in production = C7000G2 + Bl460g6 x3 + P712m + P2000g3 SAS running server 2012 r2,everything work perfectly. i bought used the exact same parts, to build another setup similar,all part...

View Article

Re: MSA 2040 - Dusting and Cleaning

I just wanted to post an update!!!I finally had some downtime when I was relocating my MSA2040 and Servers. Decided to take the time and do some cleaning. Some important notes before I get in to...

View Article


Re: HP MSA 2040 ES SAN and Citrix XenServer - why not certified?

I can't tell you why it isn't supported but the engineering team confirmed that it is not and they don't have plans to support it. There really isn't much more to say than that. The team prioritizes...

View Article

Re: HP MSA 2040 - Dual Controller iSCSI - Disappeared. Critical Error:...

Hello, anybody solve this problem?  I have this errors and the controller does not boot:WARNING Killed partner controller. (reason: Non volatile device flush or restore failure)

View Article

Re: HP MSA 2040 - Dual Controller iSCSI - Disappeared. Critical Error:...

Hello AnieBuhr,Could you clarify if you have the problem mentioned in the initial thread? Or is it a new different problem?If it is the same problem that was mentioned in the initial thread, please...

View Article


What cables to use

Hello Forum,Kind of newbie question, but we've bought a P6550 and 2 EVA4400's On the P6550 controllers are 4 FC, and 2 SAS ports per controller.The FC ports are to connect/provide access to servers,...

View Article


killed partner controller. (reason: Non volatile device flush or restore...

Hello, we had shutdown a storage msa2040 and after power on again these message appear and controller "A" does not workkilled partner controller. (reason: Non volatile device flush or restore failure)...

View Article

Re: HP P2000 G2 MSA (2312sa) restore defaults factory

There is a command to restore defaults, but i don't know if this clear volumens and configurations.... maybe with the commnad "restore defaults local-only"# restore...

View Article

StoreVirtual VSA Licensing

Hello - I have a licensing question that I hope someone can help me with.  We're looking at getting StoreVirtual VSA for three nodes with about 8 TB total disk space each.  Does that mean we would need...

View Article

Re: HP P2000G3 SAS Crasiest Bug EVER !

with only 1 cable from 1 single switch mapped to 1 port only from the bllade to 1 port of the P200g3 trough A4 port everything is working fine.as you see the preffered and current partner is B and i...

View Article


Re: StoreVirtual VSA Licensing

Hiyes if each node has about 8 TB you will need three 10 TB licensesRegards 

View Article

Re: What cables to use

Do you have several EVA models or just the P6550 and a couple of disk chassis? The P6550 is using Y-cables to the disks in order to create 2 "loops" for disk access.

View Article


Re: What cables to use

see appendix A:https://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5062117&docId=emr_na-c02858214&docLocale=en_US

View Article

Re: What cables to use

Torsten tnx for reply.Have a 6550 and eva4400 disk.On 4400 are 2 fc ports. Only 't hing is, all cables i see are sas on both ends

View Article


Re: What cables to use

still not sure what you really have.

View Article

Image may be NSFW.
Clik here to view.

Re: What cables to use

This is P6550 back-endThis is EVA440 shelf (AG638B controller)

View Article

Image may be NSFW.
Clik here to view.

Re: What cables to use

AG638B is the M6412 chassis used by EVA4400, the P6000 is using M6625 and M6612 disk chassis.EVA4400 backend (disks/disk enclosure) is fibre channel, P6000 is SAS.I guess this won't work. 

View Article
Browsing all 8325 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>