Re: Connect SAN Storage without Fibre Channel Switch
Hello,The P6300 EVA is a retired product. You should check all connectivity options using SPOCK: https://h20272.www2.hpe.com/spock/You should be aware of the limited OS support for this system....
View ArticleReplication between HPE MSA 2040 and 2050 for Disaster Recovery
Hello everyone,Please, I configured both storage box to be in the same subnet, created a peer connection between 2040 and 2050 successfully by querying the peer connection from 2050, since 2040 doesn't...
View ArticleRe: Disk Performance - VMWARE 6.7, MSA2040 SAS and software iSCSI
Why not supporting newer VMware updates within the same version, while Microsoft is doing the same with Windows 2016 and it's large Anual updates and here HPE doesn't look behind the "DOT" for the...
View ArticleRe: Replication between HPE MSA 2040 and 2050 for Disaster Recovery
Request you to please provide clear details like which array is in DataCenter or DC and which array is in DR site. AFter that which array you moved to which site. That will help us to understand the...
View ArticleRe: MSA 2040 presenting one large volume
Dennis Handly,You have mentioned that the data corruption can be prevented by:"Yes. The only way this can work is if each host can only write to separate parts of the volume. I.e. carve the volume...
View ArticleClik here to view.
subcomponent of this component is unhealthy p2000
hi my storage have turn on warning light and the have thiwsw problemwhat should i do ?subcomponent of this component is unhealthycomponent Id : enclosure 1 , current 12V loc : lower-IOM B
View Articlehp p2000 storage alerts
hi,is there any way to extract th alerts from hp p2000 storage?i tried to do it with powershell but didnt know how to pass the authorization method...any ideas?
View ArticleRe: subcomponent of this component is unhealthy p2000
Hello BlackRoze,This means the Controller B has some issue, its good to collect the store logs and check what exactly the issue is.please provide the logs to check on this, or you may log a case with...
View ArticleRe: subcomponent of this component is unhealthy p2000
Hello,You should first confirm both power supplies are properly turned on (if they have switches) and connected to PDUs. If one of the power supplies is showing an amber LED this should be corrected...
View ArticleRe: hp p2000 storage alerts
Hello,It is difficult to know what you are trying to do here. All alerts are also posted in event logs. The array can push alerts to a user either using email or SNMP. However, the array is not...
View ArticleMSA 2040: The disk group is quarantined.
Hi,we have an MSA 2040 with a disk group quarantined and one degraded. when we check the disks, all 24 disks are online and "OK".We already restarted the controllers, but we're not getting this...
View ArticleRe: MSA 2040: The disk group is quarantined.
Hello, You are going to need to open a support case to help resolve your issue. We cannot fully troubleshoot your problem in a forum.From what I have seen from the breif log snippet your drives are not...
View ArticleMSA 2040 SNMP for PRTG
HelloCan you please tell me how to configure SNMP on MSA 2040 so that I can receive information from it (PRTG)?If I enter setup notification, snmp is turned off.If I turn it on, I need to select a...
View ArticleRe: MSA 1050 SAS connected to VMware 6.7 U1
Hi all, i have the same problem.Firmware is up to date in both MSA and hosts (2 x HP gen 10).Here is what i get on my MSA with # show ports detail# show ports detailPorts Media Target ID Status...
View ArticleIs it possible to create multiples iSCSI targets on MSA1040 or MSA2050
Hi,Is it possible to create multiple iSCSI targets on MSA1040 or MSA2050?We have a solution that recommands having separate tagets for our iSCSI volumes.Regards.
View ArticleAdd new physical disks to existing Disk Group on MSA1050
Hi, I intend to add 2 new physical disks on an MSA1050 and extend my existing Found some posts on how to do it for MSA1040, but it seems I can't do it on MSA1050 as only option on Modify Disk Group is...
View ArticleRe: Add new physical disks to existing Disk Group on MSA1050
Hi Afonso,MSA 1050 does not support linear storage. Hence the steps to expand a vdisk does not apply here.In virtual storage, you cannot expand existing disk groups. To add more disks to the pool you...
View ArticleRe: Is it possible to create multiples iSCSI targets on MSA1040 or MSA2050
Hi,MSA 1040/2050 doesnt support mltiple iscsi targets.The storage system uses Unified LUN Presentation (ULP), which can expose all LUNs through all host ports on both controllers. The interconnect...
View Article