Re: P2000 G3 two vdisk with same name
As you have mentioned you have inserted 1.6 and 1.10 today from other system so they are not part of this system. It looks like they still having metadata because of which you are able to see they show...
View ArticleRe: P2000 G3 two vdisk with same name
thank's again Subhajit, i'll try to remove the 2 disks then delete the vdisk after the backup
View ArticleRe: MSA2312i vdisk with 2 LEFTOVR disks after upgrade
Hello Luca , I understand your concerns. I do see a lot of fixes related to quarantine issues in latest firmware.However, till we reach the latest firmware we cant rule out such issues from occuring ....
View ArticleMSA2052 slow performance
Hello,My MSA2052 have a setup of 18 SSD drives and 20 SAS drives where SSD disk group is configured with RAID5 and SAS drives are configured as RAID6. All the volumes are configured as "no affinity"....
View ArticleRe: P2000 G3 two vdisk with same name
.........Can you please help us to understand if the issue got resolved or not?If issue got resolved then how?Also request you to mark the forum as resolved if there is no more outstanding query from...
View ArticleRe: MSA2052 slow performance
In order to troubleshoot Performance issue, there are many factors involved and it's not straight forward task. Some of the best practice to follow can be no hardware issue should exist, firmware need...
View ArticleHDD not detected when replacing failed disk MSA 1040
Hi I recently had an error in our HP SAN MSA1040 where it said one of the disks was degraded.I purchased a new Segate Enterprise Disk with the correct specs to match that of the origional HP Disks,...
View ArticleRe: MSA2052 slow performance
I would suggest to go through the below best practice document,https://h20195.www2.hpe.com/v2/getpdf.aspx/4aa4-7060enw.pdf Hope this helps!RegardsSubhajitIf you feel this was helpful please click the...
View ArticleRe: HDD not detected when replacing failed disk MSA 1040
It's not recommended to use any non HPE supported drive otherwise you will not get support from HPE for non supported drives. It's possible that Controller firmware not able to understand the drive...
View ArticleRe: MSA2052 slow performance
Hi,Why not use a tool to generate the load and checkhttp://www.iometer.org/doc/downloads.htmlEither it will give performance or throw error somewhere.Prashant S.
View ArticleD3610 Controller Redundancy
All,I've got a single D3610 connected to a host via a single SAS cable on DP-1 on Controller 1. Is the a way to connect Controller 2 to my host so that if Controller 1 failed, Controller 2 would take...
View ArticleRe: SMI-S connection to MSA 2040 and SCVMM
I know this is an old thread, however I am having the same problem. I get the following error:"Registration of storage provider https://10.X.X.X:5989 for user domain\SANUser failed from...
View ArticleRe: MSA2052 slow performance
I log a case to HPE and they say there's more load on this 4 disks as they analyze the disk statistics. But those disks are SSDs, the IOPs are mostly around 370 - 400 IOPS, its still consider low IOPS...
View ArticleP2000 G3 two vdisk with same name
Hello, On a P2000 G3 ( firm TS252R007):I had a disk missing (fault light on) that was probably reconstructed on a spare and another on in LEFOVR state. The vdisk had still one spare availaible ( 2...
View ArticleRe: P2000 G3 two vdisk with same name
You need to provide more accurate information like location of drives failed, location of drives was in spare, location of drive kicked in to rebuild vdisk, when you say drive failed then was it part...
View ArticleMSA 2050 Configuration in 3 Node 2016 Hyper-V Failover Cluster
Hello All,I am building a 3 node Windows Server 2016 Datacenter Edition Failover cluster using DL380 G10 servers, an MSA 2050 (ISCSI with dual controllers). I have a pair of Aruba 2540 switches for the...
View ArticleRe: MSA 2050 Configuration in 3 Node 2016 Hyper-V Failover Cluster
This was totally self inflicted. I got my wires crossed between the switches and the MSA. All is well. Thanks,Vint
View Article