HP MSA P2000 schedule
Hello!Can anyone help me?We have HP P2000 G3 10 GbE Array and recently it stopped to create snapshots on schedule. There are couple VD on Array and the schedule worked for 3 years for the first one and...
View ArticleRe: HP MSA P2000 schedule
What is the Controller firmware version your P2000 running now ?Have you tried restarting the array?If manual snapshot creation working and only schedule not working then it could be old firmware...
View ArticleRe: HP MSA P2000 schedule
Hello,Along with answering the previous questions can you please review the space in the vdisk and snap pool? You may have grown the size of the vdisk to a point it no longer can create a snapshot and...
View ArticleRe: HP MSA P2000 schedule
Thank you for your reply!1. The controllers (A, B) firmware version is TS250R0212. Yeap, I have restarted the array, and you are right, it fixed, but for a while.I have set new schedules for my 2...
View ArticleRe: HP MSA P2000 schedule
Hello Shawn_K!There is enough space on both Vds. The used space less than 3% on snap pools.And I got no any warning threshold messages on logs (as you can see on attached logs file).Thanks!
View ArticleRe: HP MSA P2000 schedule
When you confirm that after reboot of the Controller issue get fix for sometime then it's old code issue of the snapshot scheduler. There could be many fix got released and few of the fix as mentioned...
View ArticleRe: HP MSA P2000 schedule
According to your post herehttps://community.hpe.com/t5/MSA-Storage/how-i-can-download-firmare-for-san-storage-hp-p2000-msa/m-p/7029405#M12516<--The upgrade path will be as below,TS201XXXX->...
View ArticleRe: HP MSA P2000 schedule
Yes you are correct and the same information mentioned here as well,https://h41111.www4.hpe.com/storage/msafirmware.html"UPGRADE NOTE: If upgrading from an older version of firmware it may require a...
View Articleissue with firmware upgrade HP MSA 2040 single controller
I am trying to update my firmware on my single controller msa 2040 ... whether i use the smart component or SMU V3 the update fails because it looks for the second controller which is not installed......
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
Download the firmware file and extract it with the help of some unzip software. You should be able to see the firmware bin file.To update the firmware from the CLICopy the firmware .bin file to an easy...
View ArticleMSA 2042 Mutex Error.
Hello!We use MSA 2042 (GL220P008) in combine with Peassler PRTG (monitoring software), MSA connected to PRTG via SSH connectors (sensors) and gets some information from there (Disk Status and other)....
View ArticleIdentifying physical disks in RAID 10 on MSA 2050
HelloI have inherited a MSA 2050 SAN from my predecessor who configured the ten discs in the array as RAID 10 (undocumented of course). I may be missing something obvious but is it possible to identify...
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
thanks a lot for your input.. but doing it from ftp did not bring any improvement.. i do not have even a progress in ftp as the documentation said it should
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
May I know what is the current firmware version installed ?Can you please capture the screenshot of the error both from SMU and FTP so that I can check further?Did you tried to reboot the Controller...
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
Hi firmware version is GL210R004 i am trying to update to GL225R003https://1drv.ms/u/s!AuADBFOxK9m_gfpEjukD_DpBFLM73whttps://1drv.ms/u/s!AuADBFOxK9m_gfpFDdMwgmR3lydyqg
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
Hi firmware version is GL210R004 i am trying to update to GL225R003https://1drv.ms/u/s!AuADBFOxK9m_gfpEjukD_DpBFLM73whttps://1drv.ms/u/s!AuADBFOxK9m_gfpFDdMwgmR3lydyqg
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
In case of Single Controller firmware update, it's always suggested to do the same from CLI or FTP method or from SMU by supplying bin file or firmware file because if you try with the help of exe file...
View ArticleRe: issue with firmware upgrade HP MSA 2040 single controller
Hello,Is the array set up as a single controller system? If the redunancy mode is set to Active-Active, then the system is configured for the second redundant controller. You can check the redundancy...
View ArticleRe: Identifying physical disks in RAID 10 on MSA 2050
This is very good query . I will take this as feedback and future enhancement for this product.As per my understanding this is not possible at this moment to see from SMU or CLI but from logs it's...
View ArticleRe: MSA 2042 Mutex Error.
Your query more specifc to Peassler PRTG software. I just tried to Google it and found the below two links which may help...
View Article