That helps a lot, thank you for your support with my greatest gretitude
↧
Re: Two devices detected by Linux Server
↧
MSA 2060 Controller issue
Hello everyone,
I am new to the SAN devices. Recently I have a request to update some configurations on my two MSA 2060 boxes like the notification emails, SMTP server etc. I have done one of the two MSA2060. (SAN-A).
But whenever I tried to access to the other MSA2060, the box (SAN-B) with the Web access was failed and it keeps looping on the login page. Some how after a certain time, I can manage to get into the page but when I access to the Notification page to update the SMTP server etc, once I click Set. It will keep looping as well. I later found out that there is an SSH session I can get into it. I changed all the request information successfully. I can also "TEST" by sending email.
So, in this case, it looks like the WebUI for the SAN-B is not functioning properly. Can I do the CLI - restart mc to make this WebUI back to function?
Cheers,
Timothy
↧
↧
Query: MSA 2060 Controller issue
System recommended content:
Please click on "Thumbs Up/Kudo" icon to give a "Kudo".
Thank you for being a HPE valuable community member.
↧
Re: MSA2060 optimal Configuration of Diskgroups
To all,
thanks for the replay. I created 2 DGs (1 DG for each Controller)
Regards
Ruediger
↧
Re: Two devices detected by Linux Server
Hello @XiangAlephas,
That's Excellent!
We are delighted to hear your concern has been adressed and we appreciate you for keeping us updated.
↧
↧
Query: MSA2060FC optimal DiskGroup and pool config
Hello,
Let us know if you were able to resolve the issue.
If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.
Please click on "Thumbs Up/Kudo" icon to give a "Kudo".
Thank you for being a HPE valuable community member.
↧
Query: MSA 2040 - Port Indicators in "Storage Management Utility"
Hello,
Let us know if you were able to resolve the issue.
If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.
Please click on "Thumbs Up/Kudo" icon to give a "Kudo".
Thank you for being a HPE valuable community member.
↧
Re: MSA2060 optimal Configuration of Diskgroups
@ruahr
Sounds good, there are definitely some good reasons to create 2 disk-groups, 1 for each pool.
- Separation of workloads
- Possible increased performance due to the additional controller being used (unlikely in the configuration described as the spindle count will be the performance limiter)
- Logical/Physical separation of volumes
...
There are numerous reasons to configure differently which are hard to explore all in forum note.
↧
Re: MSA 2060 Controller issue
Hi,
yes, restart MC will reboot the Management Part of the Controller, without disrupting the Storage IO.
(SC, is for the Storage Controller)
However, these settings are only done on one of the two Controllers and replicated internally to the other.
So, there is no need to set it on both Controllers.
Cali
↧
↧
HPE 3PAR 2 x 8440 in Remote Copy;
Hi,
HPE Team, a customer here on the channel has two 3PAR 8440... Both storages with FC, SSD and NL disks... However, the storage capacity is not the same! The customer asks me to configure Remote Copy for active/active with peer persistence... My question is, can storage 1 with SSD volume be replicated to storage 2 in FC or NL? Is it supported to replicate between different disk technologies?
Regards,
Carlos Oliveira.
↧
HPE 3PAR 2 x 8440 in Remote Copy;
Moved to HPE 3PAR StoreServ Storage
↧
Query: MSA2312 firmware upgrade
Hello,
Let us know if you were able to resolve the issue.
If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.
Please click on "Thumbs Up/Kudo" icon to give a "Kudo".
Thank you for being a HPE valuable community member.
↧
how to enable multi server access in msa 2050
Dear Sir,
MSA2050 storage confiured earlier. we are able to access voulmes & sharing is done from file server. We want now to access in 2 servers map which is not able by scsi initiator. We have installed microsoft failover cluster. 2 are VM's. in single VM we are able to initiate storage and accessible. But if i initiate in other VM (2) it's not initiating. Can anyone help in this case.
Storage is connected with HP 530SFP+ 10Gb Dual Port PCIe Ethernet Adapter Card 656244-001 w/ (2) SFP
Thank you
↧
↧
Connect HPE servers to MSA 2060 with a 25GB link
Hello everyone,
Please, to connect HPE servers with the "Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE" card to an MSA 2060 iscsi 10Gb bay, which DAC cable could be used without going through a switch?
↧
MSA 2040 - Delete Virtual Disk Group (Stauts QTOF)
Hi,
we have a MSA 2040 for which we no longer have a current support contract.
Right now, there are two Volumes configured (Volume A, which contains 5 virtual Disk Groups and Volume B, which contains 4 virtual Disk Groups).
Due to a failure of the air conditioning systems we had some hard disk errors and one of the diks groups in Volume B is in the state Fault (QTOF).
As we don't had important data on this volume, we performed a "Clear Metadata" on the crashed disks and they are recognized correctly again.
Now i would like to recreate the Disk groups, but when i want to delete the Fault one i got the error Message "Unable to remove the disk group. The operation failed because the disk group is quarantined". When i try to manually dequaratine the disk-group or vdisk, i got the error Message "The requested operation cannot be completed because the target disk group is an internal component".
The only answer i could fine so far is to contact the HPE support for some hidden commands in that case (which is not longer possible, as i dont have a valid support contract).
Any Ideas?
↧
Disque failed RAID 5 MSA 1050
Bonjour,
Je vous contact car j'ai une problématique, nous avons un client avec une Baie MSA 1050 qui était en version VE270P002-2 où un disque est tombé en panne sur un de mes 2 pools de stockage, il s'agit du Pool A. Ce pool fonctionne en RAID 5 et nous avons donc remplacé le disque défectueux par un nouveau disque aux caractéristique identiques et quand nous l'avons remplacé, aucun job de reconstruction de RAID n'a été fait, le disque apparait en AVAIL, impossible de l'ajouter manuellement au disk group....
J'ai passé la maj firmware VE270P008 en pensant que cela pourrait m'aider mais ce n'est pas le cas je suis toujours au même point.
Mon pool A est composé de disue EG00120JWJNQ en "Revision : HPD2", je n'ai pas pu trouver exactement la même référence donc j'ai mis un disque EG00120JXLWA en "Revision : HPD8" et je ne sais pas si cela peut avoir un lien avec le fait que je suis dans l'incapacité à remonter mon dsique remplacé sur mon RAID.
En vous remerciant par avance de votre retour,
Cordialement.
↧
Re: Disque failed RAID 5 MSA 1050
The Quest for RAID Reconstruction:
Disk Replacement and RAID 5:
Replacing a failed disk in a RAID 5 configuration should indeed trigger a reconstruction job.
However, it seems your new disk isn’t joining the party. Perhaps it’s shy or lost in the digital forest.
Firmware Update (VE270P008):
You’ve wielded the firmware update spell (VE270P008), hoping it would awaken the RAID reconstruction magic.
Alas, the disk remains in AVAIL, like a wandering spirit.
Disk Compatibility and Revisions:
The disk you replaced (EG00120JXLWA) has a different revision (HPD8) than the original (HPD2).
This mismatch might indeed be causing the hiccup. RAID controllers can be picky about their companions.
The Compatibility Spell:
Here’s what you can try:
Compatibility Check: Ensure the new disk (HPD8) is compatible with your RAID controller and the existing disks.
Manual Addition: If compatibility checks pass, manually add the disk to the disk group. Sometimes, a gentle nudge works wonders.
↧
↧
Re: Disque failed RAID 5 MSA 1050
J'ai pu voir qu'il était apparemment possible de mettre à jour les firmware des disques donc de passer de HPD 2 à peut être HPD8 ?
La seule chose que j'ai pu faire avec mon disque était de l'ajouter en tant que disque de spare mais ce n'est pas la config de base.
Pensez-vous que si je fais cette fameuse mise à jour de mes firmwares de disque cela pourrait m'aider à reconstruire mon RAID ?
↧
Re: MSA 2060 FC Compatibility with TP-Link 10G Switch
Hi,
I have purchased and installed P9D94A HPE SN1100Q 16Gb 2p FC HBA;P9D94A for my HPE Server (Windows server 2022).
I couldnot find the compatible drivers for these HBA. Can someone help.
I see below error
"
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
↧
Re: Connect HPE servers to MSA 2060 with a 25GB link
Hello @Prego2024,
Thank you for posting.
We noticed that you confirmed in a private message that the issue has been resolved. Could you kindly share the steps or solution you discovered, as it could be helpful for other members of the Community?
↧