Re: PE STOREEVER MSL2024 - Fan system
The MSL2024 have a fixed Build-In Power Supply and Fan.The MSL4048 can have a redundant Power Supply.Never seen a failed Power Supply or Fan in a MSL2024 in last 20 Years.You can use a Y-Power Cable to...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
How do you connect iSCSI 10GB controllers on the MSA1040 to non-iSCSI bound 10GB HBA ports on the ESXi hosts if you are not binding them to iSCSI ports within VMWare?
View ArticleRe: PE STOREEVER MSL2024 - Fan system
Thank you for your help. I am intresting only to have Fan system hot plug. I uderstood that this equipment is not hot plug or swappable. It is true?
View ArticleRe: MSA 2050 direct attach
Thank you for your reply.Yes. Ports are in same network.A1 iSCSI iqn.2015-11.com.hpe:storage.msa2050.18173c3ac3 Up 10Gb OKPort Details------------IP Version: IPv4IP Address: 172.16.1.1Gateway:...
View ArticleRe: MSA 2050 direct attach
IP connectivity issue is solved guys It appears local man did not connected cables as described Swapped A and BAfter I've asked to keep only one cable all become clear.
View ArticleRe: Hp p2000 g3 storage compatibility hard drive
Thanks for your reply .What model would be compatible nowadays for said storage?
View ArticleRe: MSA 2050 direct attach
Hello,Since you are using iSCSI you will need to verify if the host ports and the array host ports are all configured the same. WIth 10G iSCSI you can use either one-way or mutual CHAP protocol. Make...
View ArticleRemove unwanted IQN from MSA 2040
We have a 3 node cluster that uses an MSA 2040 for the shared storage and we recently had a problem with one of the nodes. In the end we had to rebuild the node and gave it a new name but we now see...
View ArticleRe: Remove unwanted IQN from MSA 2040
Hello, If you apply a knickname to the IQN you wish to remove it will then show the option to delete. You can find more information in the SMU guide:...
View ArticleRe: Remove unwanted IQN from MSA 2040
Shawn,Thanks for the response but we had a Nickname assigned to the IQN originally but the "Delete Host" options were always greyed out (even after removing any mappings).I used the CLI to try and...
View ArticleRe: Remove unwanted IQN from MSA 2040
I think you added the Host in MSA manually with the help of IQN of iSCSI initiator of the Host which is showing now as old entry.Have you tried to delete the Host from MSA?After that have you tried to...
View ArticleRe: Remove unwanted IQN from MSA 2040
I can't remember if we added the host originally using the IQN or if it was Discovered but we've been unable to remove/delete the entry using the web interface or CLI commands.I think it's worth...
View ArticleRe: Remove unwanted IQN from MSA 2040
Hi Russell,A suggestion for you. When deleting the unwanted IQN if the hosts are actively connected you are likely getting into a tangle with the controller being able to see the WWN of the host. You...
View ArticleRe: Remove unwanted IQN from MSA 2040
Shawn,Thanks for the suggestion......we could try physically removing the iSCSI cables (Direct Connect) from the rebuilt host and see if that allows us to remove the unwanted IQN before we try the...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
MSA1040 controller A:10GB Port 1 - 192.168.100.10/2410GB Port 2 - 192.168.100.11/24MSA1040 controller B:10GB Port 1 - 192.168.100.20/2410GB Port 2 - 192.168.100.21/24ESX1 Physical NICsVMNIC4 - 10GB HBA...
View ArticleRe: MSA 1040/2040 iSCSI Direct Connect with VMware vSphere
MSA1040 controller A:10GB Port 1 - 192.168.100.10/2410GB Port 2 - 192.168.100.11/24MSA1040 controller B:10GB Port 1 - 192.168.100.20/2410GB Port 2 - 192.168.100.21/24ESX1 Physical NICsVMNIC4 - 10GB HBA...
View ArticleRe: Port indicator in SMU HP MSA 2040 SMU
...and another one from the manual:The Ports B block shows similar information for controller B..I have the same situation as you have.
View ArticleClik here to view.
MSA Drive Firmware Matrix - Now updated with direct firmware download links
The MSA Drive Firmware Matrix (https://www.hpe.com/storage/MSADriveFirmware) has just been updated. The matrix on this page contains: Drive model numberCurrent/latest firmware version Option part...
View ArticleRe: Port indicator in SMU HP MSA 2040 SMU
Hello Bodgan,From the picture you sent you can see that port B1 has one active lane and one bad lane while port B2 has two active lanes. This is likely due to a bad FC cable as they can become bent and...
View Article