Re: MSA 2012i issue
of cousrce I tring several times to start MSA with 1 controller. The same. 1 - hang up. 2 - didnt answer
View ArticleRe: Upgrading servers on a failover cluster with P2000 MSA storageworks
I tried to login - OK I didn't do any actions just walk and look. Everything shows except "System Events" (see picture - links on the gray panel ) IE version is 11.0.9600. Windows version is 2012...
View ArticleRe: Upgrading servers on a failover cluster with P2000 MSA storageworks
>> The question is will the Storage Management Utility (SMU), that came with the P2000 MSA storageworks, work with W2K12 R2? The SMU runs on the MSA and is browser based, it works, why not? You...
View ArticleClik here to view.
MSA2040 Remote Management
I have several MSA2040 in remote offices. They have redundant (Gladden CPU) SAS controllers in Top (A) and Bottom (B). The other day we were having A/C issues in one of our offices and we were...
View ArticleP2000 G3 Controller firmware upgrade fail
Greetings,We have 2 P2000 MSA G3's in production where each one has 2 SAS controllers installed. This past weekend I scheduled time to update the firmware on all for controllers from TS252R007 -->...
View ArticleEVA6500 Firmware Upgrade
I have EVA 6500 with XCS ver 10000000 and Command View Ver 9.4. I upgrade management software ( Command View on Management Module ) from 9.4 to 10, then from 10 to 10.2 and final from 10.2 to...
View ArticleRe: EVA6500 Firmware Upgrade
Do you have CV server based too or only the management module?
View ArticleClik here to view.
Re: P2000 G3 Controller firmware upgrade fail
Also like to add that the way I've updated the firmware was from the controller's web interface firmware upgrade section and browsing to the downloaded / extracted .bin file. I just now attempted to...
View ArticleHP P4300
Hi,I have a problem with a HP 4300 SAN with 8 x 1tb SATA and Lefthand 12.5. Each 30 minutes, I lost the connection for 10 secondes. Any idea? I reinstalled the OS but the problem is still the same.
View ArticleRe: EVA6500 Firmware Upgrade
Yes i have install Command View 10.3 on Windows 2008 R2 server and i have also Command View 10.3.3 on MM.
View ArticleRe: EVA6500 Firmware Upgrade
Did you clear the browser cache and even the flash cache (from flash icon in control panel)?
View ArticleRe: P2000 MSA G3 SAS & Proliant Gen9 Server
MSA2040 GL220 release notes are also mentioning the H241 issue, 'not to update the firmware online'Is there any sign of support yet, checked Spock, no changes.OBP presales just says 'check spock' ,...
View ArticleRe: MSA2040 Remote Management
Newer Power Supplies have no more Power Switch.The Controllers ares down if the Blue LED on both Controller is on.At this time remove the Power Cord and reinsert to Power it On.
View ArticleRe: Unable to log in to P2000 through webUI
Hii, Can yo try change time example: "set controller-date apr 22 20:47:0 2016" and try again log in to web interface.
View ArticleRe: HP P4300
This is a duplicate, please reply in the following topic:http://community.hpe.com/t5/Storage-Area-Networks-SAN/HP-P4300-connection-lost/m-p/6851935
View ArticleMSA 2040 adding physical disk in virtual pool
Hi everyone,It's possible to add a physical disk in a virtual pool? This is my scenario: SAN HP MSA 2040 Controller A:- virtual pool : vDisk1- RAID 5: 5 disks SAS 600GB per disk, total size 2395 GB...
View ArticleRe: MSA 2040 adding physical disk in virtual pool
HiYou can only add a virtual disk group to a virtual poolthat is you need to create a new virtual disk group (Raid-1,Raid-5 etc) preferebly the same raid as the first vitual disk groupand it will be...
View ArticleRe: MSA 2040 adding physical disk in virtual pool
Thank you Giladzzz,your answer is very helpful!Best Regards
View ArticleP2000 G3 SAS Performance I/O in Question and Best Practices Using it in...
Few part question here:1. Questionable I/O throughput with server and P2000, are my results on par with hardware/software setup or I have a configuration/hardware issue. Are the 7.2K disks the...
View Article