Re: P2000 G3 connecting to 3 hosts
if you share your email ID then I can share one document similar to your setup..........this will help you for sureRegarding iSCSI sessions yes 1 initiator to 1 target is required. This need to be...
View ArticleRe: MSA 2012fc
if you can tell exact drive model.......that helps to determine the support possibilityFor example, I searched random and found the below firmware download link for few drive models which can be use in...
View ArticleRe: HPE MSA 2050 1 port in use
you need to check if MPIO enabled or not in the host systems. If not then enable it. After that need to check what MPIO path policy set. It needs to be Round Robin with subset. Then in iSCSI initiator...
View ArticleRe: MSA2000 vDisk rebuild
you haven't mentioned exact MSA model, Controller firmware version and RAID information for the vdisk. Could be a MC restart is the 1st step. If still no progress then Controller reboot who owns the...
View ArticleMSA change host-port-mode
Hello,could you help me with following question: our MSA 2040 (GL220P009) works with host-port-mode FC (all 4 ports are FC) and we have host connected to 1st interface. We need to connect iSCSI host to...
View ArticleRe: MSA change host-port-mode
For both controller modules, all ports can be set to FC, all ports can be set to iSCSI, or the first two ports in eachcontroller module can be set to FC and the second two ports can be set to iSCSI.set...
View ArticleP2000 G3 SAS problem with a FRU Event A9060 Event Code 8
Good morning friendsA few days ago, a disk presented a problem, and RAID 6 was degraded. I made a purchase for another new disk, HP stamp and then inserted it for RAID was rebuilt.When I came back to...
View ArticleRe: P2000 G3 SAS problem with a FRU Event A9060 Event Code 8
need more information..........as per the screenshot it looks to me Drive at location Enc 1 Slot 4 with serial number J9VB0XZL shows lots of hardware or medium error. Finally it got failed on 19th...
View ArticleRe: P2000 G3 SAS problem with a FRU Event A9060 Event Code 8
The drive you have installed EF0600FATFF is not a supported HDD for the MSA P2000 array. So one issue you will face is the drive may not be handling errors, scrub, or IO correctly. The error reports in...
View ArticleRe: P2000 G3 SAS problem with a FRU Event A9060 Event Code 8
Good MorningFirst, thanks for the comeback!I'm left attached to the equipment log.LogHugs
View ArticleRe: P2000 G3 SAS problem with a FRU Event A9060 Event Code 8
Thank you for sharing the log file. I see you had issue with drive at location Enc 1 Slot 4 with Serial number: 6SL0XMBK0000N141GHSE and drive model: ST3600057SS. This drive was failed on 24th Feb 2018...
View ArticleRe: HP MSA SAS disk dead / compatibility question
Hey, I just had the same dilemma. I have a faoled 600GB drive 601777-001and my supplier sent me a replacement drive 787656-001. What threw me was 6gbvs 12gb. Did you have any issues using the 12gb as...
View ArticleRe: HP MSA SAS disk dead / compatibility question
I would suggest always check MSA drive matrix for support perspective before using any drive in MSA box,https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04315770As per above I seefor spare...
View ArticleRe: Reset P2000 G3 password
Hello.For you to reset the password from STORAGE P2000 G3. Access the STORAGE whit USB cable using an emulator (putty).User: restoredefaultspass: MACADDRESS ==> first check the MACADDRESS of...
View ArticleRe: HP P2000 Reset password
Hello.For you to reset the password from STORAGE P2000 G3. Access the STORAGE whit USB cable using an emulator (putty).User: restoredefaultspass: MACADDRESS ==> first check the MACADDRESS of...
View ArticleRe: how can i reset my p2000 g3 password?
Hello.For you to reset the password from STORAGE P2000 G3. Access the STORAGE whit USB cable using an emulator (putty).User: restoredefaultspass: MACADDRESS ==> first check the MACADDRESS of...
View ArticleRe: HP P2000 Reset password
This operation reset only the password or the storage resets all settings to the factory settings?the storage restarts full or controller only?
View ArticleRe: HP P2000 Reset password
you can check this discussion where one output shared by someone........hope this helps to understand what all gets change,https://community.hpe.com/t5/MSA-Storage/P2000-Password-Reset/td-p/6979673
View Article