Re: MSA2052 - 4 SSD and 8 SAS drives
Yes I am able to open it........you can google it as well
View ArticleRe: VMware provisioning type for MSA2040 with virtual pool
Read it but the best practice guide mentions nothing about provisionng on VMware unfortunately.Did a test in our Nordics environment, our standard is now Thick Lazy Zeroed for the reasons mentioned...
View ArticleMsa 2000 G2
hi Alli have a Msa 2000fc G2 that a client of mine tried to update Firmware on the, dual controllers and it died in the process now the controllers are not working. how can i go around this to get it...
View ArticleRe: Msa 2000 G2
Power OffThen Power On with only One Controller, try both.If both not working, hopefully you have Part Services.
View ArticleHPE MSA 2042
Can anyone advise? When configuring the host ports, does the system auto detect a preferred port based on speed,latency, and etc? I cannot see an option to set priority manually.I plan to configure A...
View ArticleRe: HPE MSA 2042
When you map a volume you can specify which ports that volume is available on. If you select nothing then it will be available by all four ports on each controller (assuming there is connectivty to...
View ArticleRe: msa2312i end of life
I don't have an exact date but it has been end of sale life for a long time. The 2312i is a generation 2 MSA array, we are now at Generation 5 on the MSA x05x series.
View ArticleRe: msa2312i end of life
what i would like to know is, is there a date when i would not be able anymore to buy a carepack warranty?
View ArticleRe: msa2312i end of life
Hello,Please see the EOL statement here https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05403140My understanding of this statement is that you would no longer be able to purchase a...
View ArticleRe: HPE MSA 2042
This is a great answer, thanks for your reply and the BP guide. Soo, to ensure I get max bandwidth it might be wise leaving 1gb alone. Having 1 10GB on A and 1 10GB on B. Then (eventually) add more...
View ArticleRe: HPE MSA 2042
Yes, you can do what you are suggesting and add more 10GB later. However, the ideal minimum setup is as shown in the BP guide:Server A, iSCSI port 1 to switch 1 (think A-side fabric)Server A, iSCSI...
View ArticleRe: HPE MSA 2042
Yeah, I can see how that would provide full resiliency and better flow control. I actually have 4 esxi hosts, each host has two dedicated 1GB links in the iSCSI stack with each port connected to swtich...
View ArticleRe: HPE MSA 2042
- MSA Port A1 = 10GB to SW1- MSA Port B1 = 10GB to SW 2will work fine so long as the switches particupate in the same stack and ports are in the same VLAN. If your switches are isolated then this would...
View ArticleRe: HPE MSA 2042
Thanks for your time Mike. I agree, I was even thinking instead of two 1GB from each host I could increase to four. Using Veeam and having multiple SQL servers that are quite disk heavy our IO has...
View ArticleC 7000 blade SFP incompatible
Hello i have C 7000 blade with 2 flex fabric 10 GB/24 module and 8 server BL 460 gen9 my probleme is connect this with MSA2040 and SWITCH SN3000B i don't show FibreChannel module in VC Manager and...
View ArticleLUN addresses range
New to the management of a SAN, I have a two P2000 G3 configured as a single entity. When I mapped a volume to a host, I discovered that some LUN IDs were not working. Actually, the mapping went ok...
View ArticleRe: LUN addresses range
MSA max. LUN ID is 1023.https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05075467For more Information look in:https://support.hpe.com/hpsc/doc/public/display?docId=c00403562But XENSERVER i...
View Article