Clik here to view.
Re: HPE 4130 upgrade to 8 disks
Take a closer look: You probably need an upgrade license.
View ArticleRe: HPE 4130 upgrade to 8 disks
Hi,The 41xx nodes have by default 4 disks, the 43xx nodes 8 disks.There is no license, it is not possible to add disks, even if there are slots available. This is due to the fact that it is a DL360...
View ArticleRe: HPE 4130 upgrade to 8 disks
But that just appears as a marketing spec:Looking at Page 8, the model detail is listed (B7E16A), and the diagram shows slots 5-8 numberedI'll try to get the customer to raise a support call.
View ArticleRe: HBA Driver
Hi Torsten,Thanks for your promt response. The mentioned link has following optionsDriver - Storage Controllers - FC HBA (7)Driver - Storage Fibre Channel and Fibre Channel Over Ethernet (1)Firmware -...
View ArticleRe: HBA Driver
I requires driver for the following operating systemsOracle Enterprise Linux 7 (x86-64)Oracle Enterprise Linux 6 (x86-64)Oracle Enterprise Linux 4.7 (x86)
View ArticleMSA 2040 Tiering very low IOPS and awful performance
something is wrong with the MSA 2040 performance tiering, i can only have about 5k IOPS out of it while i have another SAN P2000 G3 which is providing 16K for the same workload.Both SAN are FC are...
View ArticleRe: MSA 2040 Tiering very low IOPS and awful performance
Hello,Please consider uploading configuration information so the group can help. Please also consider opening an HPE support case if your device is covered under support. To generate text file of the...
View ArticleRe: MSA 2040 Tiering very low IOPS and awful performance
kindly private message with a URL. so i can upload the file
View ArticleRe: MSA 2040 Tiering very low IOPS and awful performance
Done, please check private mail.
View ArticleRe: MSA 2040 Tiering very low IOPS and awful performance
done on the URL given.I am having issues to opload the file here. it doesnt accept txt file format?
View ArticleRe: MSA 2040 Tiering very low IOPS and awful performance
I've received and reviewed the config information. For the benefit of the group, I'll post a summary so far.Check your server host BIOS power profile settings to make sure all hosts are set to "Maximum...
View Articlecommande(s) pour arrêt de baie SAN MAS2040
Bonjour,En cas de coupure électrique prolongée, je souhaite pouvoir automatiser l'arrêt de ma baie SAN et de son extension de baie, via des commandes déclenchées par mes onduleurs.Pour cela, j'ai...
View ArticleThere is a problem with a FRU - MSA2324i
Hey guys,One of the disks is amber and I saw this error on on one of the vdisksThere is a problem with a FRU. (FRU type: disk, enclosure: 1, device ID: 5, vendor: HP , product ID: DG0300FAMWN , SN:...
View ArticleRe: HP StorageWorks MSA-P2000 G3 SNMP monitoring (snmpwalk)
Because the majority of the links provided in the HP(E) community are dead, the link refers to: "HP MSA 2040/1040 and P2000 G3 MSA Array Systems - SNMP MIBs"
View ArticleMSA 2040 presenting one large volume
hi all,we have a MSA 2040 and a second shelf. 48 drives in total. We are using the Storage Management Utility to configure the disks.We have created three 16 drive vRAID-10 1 disks. Each vdisk has one...
View ArticleRe: MSA 2040 presenting one large volume
i should clarify that:this basically is creating one large volume out of multiple vdisks.is this possible?thanks!!
View Articleメールにて通知される「Server Agents:～」の対処について
お世話になっております。HP Strageworks X1600を使用しております。以下のようにほぼ定期的に①・②を繰り返してメール通知されます。内容を見るとどうもストレージのベイにて異常な温度（245℃）を通知されているようです。①Server Agents: 温度ステータス 劣化②Server Agents: 温度ステータス...
View ArticleMSA2312i controller firmware needed
Hello,We have an old MSA2000i G2 which was used in a test lab. Its controllers (model AJ803A) died because of a power outage - They display the error "Warning The system is currently unavailable."...
View Article