Re: Reclaim unused storage
With linear storage, the size of a volume cannot be any greater than the size of the vdisk it is contained on. So, deleting an ununused (unrelated) volume and vdisk won't inherintly do anything to...
View Articlereset disk status flag from failed to OK or Pred. failure
Just bad luck ... 2 failing disks in one raid5 array. The system reported 2 failed disks during a reboot. After a power cycle and "F2" we were able to get the array back online and the system started...
View ArticleError on MSA Webinterface
HelloWe have the following error on a MSA Storage P2000 G3:On Webinterface: A subcomponent of this component is unhealthyPutty: shwo enclosure-statusOutput: FAN 01 OK 592267-002 CN8247T672 -- FAN 02 OK...
View ArticleRe: Error on MSA Webinterface
The system reports both compactFlash cards of the controllers as bad.Call HPE support and get them replaced.
View ArticleManagement controller failed
HI ALLWe have a shared storage SN 2S6938D039, unfortunately we can't connect to it via web, ssh, telent, so we will try to restart the Management controller via cli port, in the interface of controller...
View ArticleClik here to view.
Re: Management controller failed
>> We have a shared storage SN 2S6938D039, According to partsurfer this is a MSA2000 G2 SASIf you look at this pagehttp://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02754961you...
View ArticleP2000 firmware urls not working
I am trying to download a firmware for a p2000 controller, but none of the download links work;http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_211f81fe732941959f25a1ae68#tab2How can I...
View ArticleRe: P2000 firmware urls not working
Here is the latest TS252P005Windows https://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4118572&swItemId=MTX_89ecaf1f05e94eb0a1d614d7e8&swEnvOid=4064&lang=de&cc=DELinux...
View ArticleRe: MSA 2312sa
Set the 450GB as GS.Pull the 600GB, wait until the rebuild is complete.Add the 600GB, delete the Metadata, configure as GS.
View ArticleUpgrade Model 4354R Enclosure with Single Bus I/O Modules
I purchased a used MSA1000 from a gov't surplus auction. It came with an unused Model 4354R Enclosure. I read in the manual that I can connect two enclosures so I purchased a second used enclosure.I...
View ArticleIs the P 2000 G3 FC just capable of SNMP v1 ?
Hi,we have a MSA array P 2000 G3 FC, and i'd like to integrate it into HP SIM.From what i see it knows only SNMP v1. Is that true ?Thanks.Bernd
View ArticleRe: Upgrade Model 4354R Enclosure with Single Bus I/O Modules
After doing A LOT of reading, it appears to me that replacing the I/O Module with P/N 190212-B21 will get me the Single Bus module. The only thing I have found re: the EMU is that it needs to be...
View ArticleRe: Is the P 2000 G3 FC just capable of SNMP v1 ?
HI Torsten,i was astonished about your answer and so i doublechecked with tcpdump and wireshark. It's SNMP v1.Or does it depend on the firmware ?Bernd
View ArticleRe: Is the P 2000 G3 FC just capable of SNMP v1 ?
From user guide: P2000 G3 MSA Systems use SNMPv2c, which improves on SNMPv1 features and uses itscommunity-based security scheme
View ArticleRe: Is the P 2000 G3 FC just capable of SNMP v1 ?
Strange. wireshark says something different. Do you want to have the cap file ?Bernd
View ArticleRe: Is the P 2000 G3 FC just capable of SNMP v1 ?
this would make it incompatible to any receiver or manager.why should the msa use a 30 years old protocol instead of a 25 Years old protocol?
View ArticleRe: Managed logs warning:
I did the same but I am still getting those alerts continuously.Please help
View Article