MSA Cluster Disks do not visible in Windows Server 2008R2
We have Windows Server 2008 R2 cluster on MSA2312fcThe shared disks became not visible affter reboot servers. There are disks in Divce Manager, but threre aren't in mapped disk and button "online" is...
View ArticleHP StorageWorks MSA60 SAS/SATA 418408-B21
I am planning to set up this 579237-B21 - HP ProLiant DL360 G7 that I already have and a HP StorageWorks MSA60 SAS/SATA 418408-B21 that I already have. I am trying to wrap my head around how this will...
View ArticleTake Backup of entire Vdisk / HP P2000 G3/ OFFL/trust
Hi,One of the vdisks (HP P2000 G3) is in OFFL state due to multiple disk LEFTOVER. How to take backup of the entire data after using trust command? The vdisk is part of distibuted filesystem (block...
View ArticleMSA configuration
I have an MSA 1040 connected to one host on Port 1A and 1B connected by FB. The enclosure has two arrays setup. One array has one volume that is mapped to all 4 ports. I would like to create a new...
View ArticleRe: MSA configuration
consider this - if a controller has failed, the LUN in question is no longer mapped and presented ... all 4 ports is not that bad.
View ArticleSyslog configuration for MSA P2000
hello to everybodyhow can i configure syslog on hp msa p2000?
View ArticleA PHY was disabled. (enclosure: 1, module (disabled path to this disk): B,...
ok had a drive fail spare took over and rebuilt now i have replaced the old drive and want to set as global spare but it will not reconize have reset the controler and rescanned this is a P2000 G3...
View ArticleHP MSA 2024fc vd01 offline
I have a p2000 2024fc. Single Raid 50 array 2 parity groups. I have had 3 disks fail this week The first two were on the first parity group, the third on the second parity group.I was able to...
View ArticleMSA2040
I just have one unit of MSA2040. Ithas two controllers. It will connect to two Windows 2016 servers similar to the topic in HP MSA 2040 SAN Storage - Connecting Hosts Figure...
View ArticleRe: MSA2040 FC ODX support
*bump* It's been a while since I posted this but the issues are still there.
View ArticleRe: MSA2040
You'll have to assign an IP address you machines can connect to, ideally in the same subnet. But this is so basic, if you don't have a clue then you probably shouldn't be installing anything production...
View ArticleMSA 2040 Firmware Update | Failed/Stuck?
Hi All,We have a dual controller MSA 2040, which the other weekend I set off to update firmware from early release to current, I think GL105 to now GL220.Anyway, started this on what I found was...
View ArticleWhat is the effect of adding additional storage while the cluster is in...
I took one of the storage from the cluster to change the battery, but I got an error message that the "This cluster is Over-provisioned and Full. Writes to thinly provisioned volumes and snapshots in...
View ArticleP4300 - adjust SAN volume size
Is it possible to shrink a volume that is currently in use but has 150GB of free space in order to increase the size of another volume that is low on free space? Looking at the volume via CMC it seems...
View ArticleIs MSA 2040 Certified for Windows ODX?
Hello, I have a MSA 2040 SAN and was wondering if it is certified as compatible for Windows Offloaded Data Transfer?I use Windows Server 2016 Datacenter on my hosts and all LUNs are formated with NTFS.
View ArticleRe: Is MSA 2040 Certified for Windows ODX?
I've asked the same question before, no answers: https://community.hpe.com/t5/Storage-Area-Networks-SAN-Small/MSA2040-FC-ODX-support/m-p/6930399/highlight/false#M10455 As far as I'm concerned it's not...
View ArticleMSA P2000 G3 storage: Vdisk is quarantine and offline status
Hello All,Hope you are doing great,I have an issue in HP MSA P2000 G3 FC storage,we have one Vdisk is quarantine and offline status,we tried to dequarantine the Vdisk but without any success,please any...
View ArticleRe: MSA 2040 Firmware Update | Failed/Stuck?
Hello,for the USB/Serial Connection you need this Driver:HP MSA 1040/2040 and P2000 G3 USB Driver for Windows Server...
View ArticleRe: MSA 2040 Firmware Update | Failed/Stuck?
Hi, First, make sure both the controllers are on the same firmware. #show controllers.As you have access to controller B CLI issue command # restart mc a.post the o/p of #show controllers. & # show...
View ArticleRe: P4300 - adjust SAN volume size
It's not possible to shrink the volume without deleting it and re-creating it.
View Article