Re: hp p2000 g3 storage
For details seehttp://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02520791 Remember, this is a user to user forum.For official support contact HPE...
View ArticleRe: SAN(FC) Storage does not work with VmWare
google this:hp storageworks modular smart array 1000 user guide The device is sooo old, not sure if all the tools are still available.In fact you need a server that runs ACU (array config utility) in...
View ArticleRe: SAN(FC) Storage does not work with VmWare
Ok, Im goigng to looking for. And, when you look at settings switchs, looks good, or not(aliases, zoning, zone config..)
View ArticleRe: SAN(FC) Storage does not work with VmWare
By the way, the last chapter in this guide is telling you how to manage SSP over the CLI - serial connection to the controller.
View ArticleRe: SAN(FC) Storage does not work with VmWare
So, I discovered in server room one server, from which I did not have a administrator password. After resseting windows password and loggin, SURPRISE, all utilities are installed on this server. MSA...
View ArticleRe: SAN(FC) Storage does not work with VmWare
Sorry, the screenhttps://s15.postimg.org/n418rc8ij/ACU.png
View ArticleRe: SAN(FC) Storage does not work with VmWare
Select ACCESS CONTROLL (SSP) in the upper row and check which servers have access.
View ArticleRe: SAN(FC) Storage does not work with VmWare
ou ou ouuu, after grant access, finaly new server see the storage. JUCHUUhttps://s18.postimg.org/vt8oxxcmx/server_3_working.pngThank you very much my friend!!Now even solve a IBM storage and job will...
View ArticleRe: SAN(FC) Storage does not work with VmWare
Yetjustone more question. Event show error redudancy path failed. Its a big problem or not? It is possibleto causea reset one HP SAN switch at the...
View ArticleMSA 60 Tone When Powered up
I picked up an MSA 60 as a cheap backup target. When I power it up, it just emits a high pitched tone, like a bios error, that doesn't stop. The seller says this is normal, but I have some other...
View ArticleMSA 2040 SAS and Proliant DL360 G7
Hello,We want to connect MSA 2040 SAS to existing DL360 G7 servers for use with Vmware eSXi. Per SPOCK (https://h20272.www2.hpe.com/SPOCK/Content/ConfigurationSetDetailView.aspx?Id=83773) there is no...
View ArticleRe: Repairing YM-3591AAR power supply (HP P/N 81-00000051)
: Unfortunately, I can't tell you what is wrong with your PSU without looking at it. But the Excel table I've attached to my first post lists many other problems and their possible sources (faulty...
View ArticleRe: Repairing YM-3591AAR power supply (HP P/N 81-00000051)
Thank You Zdomici !One cooler was not working. Replacement with serviceable solved the problem.YM-3591AAR
View ArticleMSA 2040 ADDING Additional Disk to existing RAID 5 and Expansion of volume
Dear Friends, I am new to HP MSA storage. But I do have good knowledge on NetApp Storage and EMC Storages.We have one HP MSA 2040 SAN with 12 HDD, now we are planning to add 4 more HDD to existing RAID...
View ArticleRe: MSA 2040 ADDING Additional Disk to existing RAID 5 and Expansion of volume
You should get the latest" MSA 1040/2040SMU Reference Guide"for step by step instructions.
View ArticleMSA1000
Hi,We have a HP MSA1000 with 2x MSA30 disk shelves and 1x256mb cache controller. We are unable to see the disks 8-14 on both of the MSA 30's but can see 1-14 on the MSA1000 itself. Can anyone help us...
View ArticleRe: MSA1000
How many SCSI ports are on the MSA30?2?Are the right connectors both connected to the same I/O module of the MSA1000?You probably have a bad I/O module.
View ArticleMSA2040 LUN size interpretation
Hello, I've created 5,2 TB volume on MSA2040. ESXi host can see this storage device (LUN) but it recognizes it's capacity as 4,66 TB. How it is possible? Where is 500 GB? Thanks in advance!
View ArticleRe: MSA1000
I think that you have two MSA30 with DualBus SCSI Partnumber 302970-B21. One Bus for Disk 1 - 7 and the other for Disk 8 - 14. Look at the Backend of the MSA30. There should be two SCSI connetors.Your...
View Article