Asynchronous replication issue
customer has two eva 8400 and one in Dc site another in DR site.Here asynchronous replication is established. Suppose customer suspend replication at DC end for 1/2 days. Here is problem that When...
View ArticleNew server infrastructure/ Nuova infrastruttura server
Buongiorno,dovrei creare una nuovo infrastruttura composta da 2 server DL360 Gen9 in cluster, Vmware Esxi e 10 macchine virtuali. Sto cercando uno storage condiviso che garantisca prestazioni ed...
View ArticleRe: MSA 2040 question
> so it is much faster Hello!Just got access to our MSA 2040, and found that all luns there are linear.Admin claims that virtual volumes far slower, and showed simple dd test,virtual pool write...
View ArticleDeploying Shared Storage - Fibre Channel or iSCSI? Which do I recommend?
At QLogic, we provide adapters for HPE that support a variety of protocols for connecting servers to shared storage including iSCSI, Fibre Channel over Ethernet (FCoE) and native Fibre Channel (FC)....
View ArticleMSA 2312SA problem with the controller AJ808A
Storage MSA2312SA + 2 controllers AJ808A It does not work one controller if you remove one controller, the MSA perehodin not to work with a single controller
View ArticleMSA 2040 and Received an indication that the LUN assignments on this target...
Hello!Have several linux hosts connected to MSA 2040 over iscsi.Once, let's say, new lun is mapped to one of hosts, all hosts complains:Warning! Received an indication that the LUN assignments on this...
View ArticleMSA2040
Hi,I have a MSA240, I have read these support active - active mode. Is this the default mode and how can I check it is in this mode. I have a management port on each controller but I can only connect...
View ArticleRe: MSA2040
This array works in active/active ALUA mode, this means each controller is the owner of one or more vdisks. Each controller module has a management controller (MC) and a storage controller.I would try...
View ArticleHP B-Series SAN Network Advisor - Remove old wwwn (red)
I removed my old SAN from my two brocade SAN FC Switches and attached the new SAN. The new SAN shows up and is working, but the wwwn of the old SAN remains listed in red at the port. I did a...
View Articled2700
I have a d2700 SAS enclosure trying to connect to a DL580 (Win2012, internal P830 array controller) for shared storage.The DL580 simply isn't seeing the JBOD. I have a P411 external controller with 1...
View ArticleHP P2000 G2 MSA (2312sa) restore defaults factory
How to reset to factory settings the controller AJ808A to which there is not access CLI
View ArticleHP MSA 2012fc and disk enclosure
Hello.Please help to clarify some quesiton.I have MSA 2012FC and 2 disk enclosure - MSA60 and MSA2000I connect both like in this guide...
View ArticleMSA2312i Storage Controller failure
Hello, dear forum users.Could you please help resolving issue with HP MSA2312i controller?Once it has been turned off for several hours, but after power on there's a failure with controller [A].I tried...
View ArticleRe: MSA2312i Storage Controller failure
Have the same Yesterday after Power Off MSA 2040 FC for 2 hours.Controller A did not come back.Try erverything (Swap Controllers, Pull/Put, ...).Did not Help, Open a Support Case and yust now the...
View ArticleRe: d2700
Thanks for your reply, I'm not sharing between servers...there is only one server. (DL580). I should have said DAS. I can't get it to connect. Finally installed the correct drivers for the additional...
View Articlemanage a d2700 storage enclosure
other than the MFG port on the back, is there is any other way, to flash the I/O module and update the firmware of this enclosure. I can't get the JBOD to connect via a PCI card installed in myDL580...
View ArticleRe: manage a d2700 storage enclosure
I've only managed D2600 via a P411 card. And I needed to create the arrays and the usual with hpssacli/hpacucli. It wasn't a JBOD for me, but maybe it is with a JBOD SAS card. Supported adapters are at...
View ArticleRe: manage a d2700 storage enclosure
thanks for answering. I plan on using it as a JBOD. I just need to get it connected. I am using a P411 card as well. How did you update it? Does it have a default IP or port? I updated the drivers...
View ArticleRe: manage a d2700 storage enclosure
So I just ran the firmware update. But tbh I never saw any really important issues fixed with the IO module in the D2600 themselves. More often there were good issues fixed in the firmware to the P411...
View Article