Implementation of a replication method between MSA 2050 and MSA 1050
Hello,I have a video storage project.For that, I have been provided with the following hardware :Proliant DL360 Gen9 Server (Windows 2016 Server with video application)MSA 2050 (11 * 8TB)MSA 1050 (10 *...
View ArticleRe: Implementation of a replication method between MSA 2050 and MSA 1050
After going through your details I would like to inform you two things,>> Synchronous Replication not supported with MSA>> SAS interface not supported for replicationYou need to work with...
View ArticleRe: Implementation of a replication method between MSA 2050 and MSA 1050
Hello,You have a couple of misconceptions about working with replication on the MSA. Let me clarify a couple of key points.First the MSA does not perform syncronous replication. I still think the MSA...
View ArticleMSA 2052 Upgrade from SSD Cache to Performance Tier
Hi all, I have MSA2052 and on Pool A I have one disk group with SAS 10 K drives and two SAS SSDs as Read Cache.Now I buy 4 more SSDs and I want to build performance tier. Because this MSA is already in...
View ArticleRe: MSA 2050 Performace Direct Attach vs FC SAN connection
Hi,the difference is so small that it can hardly be measured.If you connect by 16GB FC direct or over a 16GB SAN Switch, will make no difference.This shouldn't matter at all for an MSA.The number and...
View ArticleMSA 2040 Failure
Hi all,I have a failed MSA2040 (both controllers have been burnt/damaged).There does not seem to be any physcially amage to the disks and was wondering if anyone knew of the correct process to setup...
View ArticleRe: MSA 2040 Failure
Hello,If you are sure no burn marks on the disks and no physically damaged, you can try with the new MSA 2040 and follow the below steps.1. Install all the disks in the same slots as per the...
View ArticleRe: MSA 2040 Failure
Complement:The Raid Configuration is on the Disk and will transfer.Everything else (Name, IP, Hosts Presentations) is on the Controller and have to recreate.Cali
View ArticleRe: MSA 2040 Failure
Hello,Yes, you will get only a raid configuration.You will get all the other information from the old storage logs.If you feel this was helpful please click the KUDOS! thumb below! Regards,
View ArticleRe: MSA 2040 Failure
Thanks for the replies. Do you know how I can access the old storage logs. The it looks like one of the compact flash cards in a controller has not been damage. Is there information I can retireve from...
View ArticleRe: MSA 2040 Failure
Hello,You can not access storage logs as per the shared information or current situations.If you collected the storage logs in the past or you saved the logs before.Sorry to say, no other way and no...
View ArticleRe: MSA 2040 Failure
Hello,Just to add a little clarity. The Compact Flash card holds cache data for faster transfer from the host to the disks. The Compact Flash card will not contain any old logs. Usually when you save...
View ArticleMSA 1040 FW update
Hello all. I've updated the FW on my MSA 1040 Storage. I installed the GL225P002-02-HP version and After the update, I cant see all information through GUI Interface. Even I can't choose between older...
View ArticleRe: MSA 1040 FW update
What was the old version from which you have updated to GL225P002-02?Did you tried different web browser ?Did you tried accessing SMU GUI from different system?Are you able to access all details...
View ArticleRe: MSA 1040 FW update
Hello, thanks for your response.What was the old version from which you have updated to GL225P002-02?GLS200R12-01Did you tried different web browser ?Yes, with the same behavior.Did you tried accessing...
View ArticleRe: MSA 1040 FW update
Ideally Controller firmware update path,GL200 -> GL220 -> GL225So if you are at GL220 then you can directly update to GL225 with latest version. Hope this helps!RegardsSubhajitI am an HPE...
View ArticleRe: MSA 1040 FW update
Hello,You mentioned you upgraded from GL200R12-01 to GL225P02-02. That is a large leap for the system to make. As mentioned, it is recommended to install GL220 and then go to GL225 first to ensure all...
View ArticleRe: MSA 1040 FW update
Ok this is the show versions detail command output: # show versions detailController A Versions---------------------Storage Controller CPU Type: Gladden 1300MHzBundle Version: GL220P010Base Bundle...
View ArticleRe: MSA 1040 FW update
We recommend you to upgrade to latest version GL225P002-02 Hope this helps!RegardsSubhajitI am an HPE employeeIf you feel this was helpful please click the KUDOS! thumb...
View Article