MSA 2050 - Host Discovered problem
Hi Support Team I have :03 HPE DL380 G10 with HBA emulex FC 16Gbps01 FC SWitch HPE SN6010C 01 HPE MSA 2050 with license Performance Tier. As my plan: SRV1, 01 Volume from MSA, SRV2, 01 Volume from MSA,...
View ArticleRe: MSA 2050 - Host Discovered problem
Thank you for comming on HPE Community Forums.I am assuming your physical connectivity from MSA host ports to SAN Switch ports and from SAN Switch ports to Server HBA ports are fine.You need to...
View ArticleRe: MSA 2050 - Host Discovered problem
Hi Subajit Khanbarman, thank you for your advise, cause Im have not exp about HPE FC Sw. After I used the CLI, I checked my SN6010c for the configuration. SN6010c = Cisco MDS 9148s. Now I focus on...
View ArticleRe: MSA 2050 - Host Discovered problem
You should check HPE SPOCK website and login using your HPE Passport account,https://www.hpe.com/storage/spockThen check MSA 2050 model and look for all compatibity in terms of Host operating System as...
View ArticleRe: MSA 2050 - Host Discovered problem
Hi Subhajt Khanbarman,I followed the link SPOCK, It leaded me with too many website and information. I just need you confirm "Do I need to upgrade my FC switch from 8.1 to 8.4 ?"I will check the zoning...
View ArticleRe: MSA 2050 - Host Discovered problem
As per HPE SPOCK it says " “Active” switch software versions are fully supported, but “recommended” is the preferred version whenever possible". Here NX-OX 8.1 is active and recommended version NX-OX...
View ArticleRe: MSA 2050 - Host Discovered problem
HI Subhajit, After I upgrade to 8.4. still the same. i figured out, that default deny on my current SN6010c for discovered "system default zone default-zone permitsystem default zone distribute...
View ArticleMSA 2040 Error Disk
Hello,I have 3 disk with error in one pool, and i have 2 disk (Dedicated Spare) but the Pool not change thisk with the bad disk.So i dont understand what i need to do, i need change the spare disk with...
View ArticleRe: MSA 2040 Error Disk
Hi,Some questions out of curiosity.What firmware is your MSA running on? Did the disks fail all at the same day/time?I had a similar issue several disks being marked as Leftovers - couldn't find any...
View ArticleRe: MSA 2040 Error Disk
Hello,Version is GL210R004.I dont know, because the disk are in the state a few months ago.I have two pool, one pool with 3 disk in that state Degraded (LEFTOVR), the pool 2 is ok, and have 2 disk...
View ArticleRe: MSA 2040 Error Disk
First of all you need to understand MSA architecture. Try below docs to get idea about MSA 2040 product,SMU guide -> https://support.hpe.com/hpesc/public/docDisplay?docId=c04220794CLI guide ->...
View ArticleBuilt in encryption of the 2050 with Advanced Data Services license option.
Hi allI have some questions about the encryption feature of the 2050, which is not available in the 2052.1. If an Advanced Data Services license is added to the 2050, is the encryption functionality...
View ArticleRe: MSA2050 disk transfer rate
What is the point of 12G drives in the 205x if they only support 6G speeds? It seems pointless to me.
View ArticleRe: MSA2050 disk transfer rate
MSA is entry level Storage and MSA 2050 designed with 6G backend speed only.As per my understanding product document covers the same as well. Also supported additional drive enclosure interface type 6g...
View ArticleHPE MSA Storage Configuration and Best Practices for VMware vSphere
HiI've been reading the above Best Practice guide, but it's dated August 2017 Rev 2.Is there anything newer than this relating to VSphere?Im just a little unsure about page 25 where it says:"VMware...
View ArticleRe: MSA2050 disk transfer rate
I have been offerred the MSA 2050 full of the following drives:J9F49A HPE MSA 1.8TB 12G SAS 10K 2.5IN 512E HDD So if the backplane of this MSA runs at 6G, why should it be sold with 12G drives? It...
View ArticleRe: MSA 2040 Error Disk
Hello;Pool 1, name vd0001 is Raid50, class Linear, status Critical, 12 Disk, 3 Disk Degraded (the disk may containt invalid metadata)Pool 2, name vd0002 is Raid5, class Lineas, status FTOL, 10 disk, 2...
View ArticleRe: MSA 2040 Error Disk
You need to first understand below vdisk condition,"Pool 1, name vd0001 is Raid50, class Linear, status Critical, 12 Disk, 3 Disk Degraded (the disk may containt invalid metadata)"RAID 50 is a...
View ArticleMSA 1050 #restoredefaults on running MSA - will it only reset the passwords?
Hi all, As per the title, if we carry out the restoredefaults process provided by HP (contractor lost MSA manager password) will this affect the volumes, pools, iscsi targets etc that we have on the...
View ArticleRe: MSA 1050 #restoredefaults on running MSA - will it only reset the passwords?
As you haven't mentioned detailed steps that was recommended so I am assuming your query related to "restore defaults" command.I would suggest you to check details from Command line...
View Article