Re: MSA2324i vDisk Rebuild Problem
Hi,Just to update this thread, it looks like the original disk 8 (Raid set 3) and disk 11 (RAID Set 4) now gone into LEFTOVR state.Current config :vDisk1RAID set 1-> 1,2RAID set 2-> 3,5RAID set...
View ArticleRe: HP MSA2312fc
....As you have mentioned Vdisk1 was in degraded state so better to fix this first. Try to figure out how many drives part of Vdisk1 had issue. If it's configured in RAID5 or RAID10 and more than 2...
View ArticleRe: MSA2324i vDisk Rebuild Problem
If disk 8 which was part of Raid set 3 now in LEFTOVER state and similarly disk 11 which was part of Raid set 4 now in LEFTOVER state as well but still VDISK1 in FTOL state which means 8 and 11 not...
View ArticleRe: HPE MSA 1050 Extend Pool A, add SSD cache
I have checked IOPs with 600GB 15K drive as my tool starts with this only. Also I have taken total drives as 3 or 5 or 9 because of keeping power of 2 for data chunklets in mind.Pool A----------VDG1 (3...
View ArticleRe: New HPE Tool - MSA Health Check
Today we just released a YouTube video giving a quick overview of MSA Health CheckLink to YouTube Video: https://youtu.be/N0unPAdh4KsCheers!/Kipp
View ArticleRe: New HPE Tool - MSA Health Check
Nice maintenance tracert msa.ext.hpe.comTracing route to msa.wip.it.hpe.com [192.58.206.98]over a maximum of 30 hops: 4 27 ms 27 ms 27 ms ae1-116.franco71.fra.seabone.net [195.22.214.30]5 119 ms 119 ms...
View ArticleRe: Problem with SSH/TELNET connection to MSA 2040
Hi,I would suggest to use Putty as SSH/SFTP client to connect to your array (instad of CMD>Telnet of Windows). Also make sure 1° the required services are active from the SMU and that 2) the userID...
View ArticleRe: New HPE Tool - MSA Health Check
You silently deleted my message and don`t resolve problem.Good work for enterprise customer !!!
View ArticleMSA1040 and SSD Drivers
Hi Folks ,One of my customers is using an MSA1040 with SAS 10k disks only ( 1,2 TB SAS 10k ) and He doesn´t have the GL200 or newer firmware in the system . He would like to install some SSD drivers to...
View ArticleRe: Problem with SSH/TELNET connection to MSA 2040
Hello,You need to upgrade your system. GL210 firmware is not an active version of firmware. You can check the current firmware at the following...
View ArticleRe: New HPE Tool - MSA Health Check
I apologize for the removal of a message today. The message contained an unsecure DNS name for MSA Health Check. The public vanity/marketing URL for MSA Health Check is...
View ArticleRe: MSA1040 and SSD Drivers
Hi Luis,MSA 1040 added support for SSD drives only from GL220 firmware version onwards.Reference GL220 firmware release notes, SMU guide and...
View ArticleRe: MSA1040 and SSD Drivers
Hi Luis, also...there is a nice page specifically made for HPE MSA Storage Firmware.
View ArticleRe: MSA1040 and SSD Drivers
Thank you so much . The anwswer was very very important . One last question ... is the SSD drivers in linear configuration with correct firmware version supported by HPE support team ( worldwide ) ?
View ArticleRe: MSA1040 and SSD Drivers
Hi Luis, MSA 1040 with SSD drives in linear vdisk configuration and latest firmware is a supported configuration.
View ArticleRe: MSA 2052: Best practice on How to Implement Multipath and LVM on Red Hat...
Thank you for the links to device mapper config guid.e Since there's no official doc to configure /etc/multipath.conf for MSA 2052. Is below looking good? I just replaced product name from MSA 2040 SAS...
View ArticleRe: MSA 2052: Best practice on How to Implement Multipath and LVM on Red Hat...
....please note multi-path configuration is no more depend on vendor. After red hat 5.5 it's native multipathing so configuration will be customer specific and vendor will not have any control in...
View Articlecomparing different MSAs and disk options
I'm shopping for a new MSA iSCSI SAN for a VMware cluster (3 hosts only).Some questions about possible configurations.We have two SQL servers running Kronos and Great Plains, plus an Exchange 2013...
View ArticleRe: 2050 filled with 24 SFF 10k SAS drives
With this many disks I was thinking keep it simple, avoid potential problems with disk failures, and use RAID 6 on the SAN....I know with next-day disk replacement RAID 5 would be possible too but...
View Article