Re: Problem with SSH/TELNET connection to MSA 2040
Hello,You need to upgrade your system. GL210 firmware is not an active version of firmware. You can check the current firmware at the following...
View ArticleRe: Problem with SSH/TELNET/HTTP/CLI connection to MSA 2040
Thank you for replay Shawn_K yes from both Controller A and B.yes, I configure the COM with these right setting.
View ArticleRe: Problem with SSH/TELNET/HTTP/CLI connection to MSA 2040
Actually this problem occurred after one of the Volumes has full space usage.
View ArticleClik here to view.
Re: Repairing YM-3591AAR power supply (HP P/N 81-00000051)
I threw out the 5.1 V / V converter unit completely, unsoldered the board. And the power supply started without this board. The transistor U604 042N03LS broke through it. And probably the U31460 chip....
View ArticleRe: Problem with SSH/TELNET/HTTP/CLI connection to MSA 2040
I was resolved the problem after trying all options available.the firmware was corrupted on both Controller, and the only Service available to update the firmware via FTP TCP 21, all other service is...
View ArticleHard Rest HP MSA 2040
HelloI can't connect to the Management Services include all of them SSH, TELNET, HTTPS, and CLI.but the Disk Volumes still accessible by server and all VMs works fine without any issue.when try to...
View ArticleRe: Hard Rest HP MSA 2040
Hello,For resetting the password you need to be direct attached to the controller using the USB cable. You cannot run this command via Telnet or SSH. Be sure to use an "s" at the end of the...
View ArticleHow do i connect to HP G3 P2000 Storage Array
I have aquired this Hp G3 P2000 SAN.How can i connect to it to explore the feature of this SAN
View ArticleRe: How do i connect to HP G3 P2000 Storage Array
Hello, You might want to reference the following guides.P2000 SMU (System Management Guide): https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02520791P2000 CLI Guide:...
View ArticleNeed help MSA 2040 + DS2700 HDD QTOF & LEFTOVR status
We have MSA 2040 + DS2700 (out of warranty). One of Vdisk health is FAULT and Status is QTOF( Quarantine Offline), because the Air Con suddenly damage and maybe overheat ,so some server and storage...
View ArticleRe: Need help MSA 2040 + DS2700 HDD QTOF & LEFTOVR status
If you are sure that drive health is fine then you can execute below command from Vdisk owning Controller CLI,dequarantine vdisk <vdisk_name>show vdisksIf vdisk state came back to FTOL then no...
View ArticleRe: Need help MSA 2040 + DS2700 HDD QTOF & LEFTOVR status
Hi Subhajit, Thank you very much for your prompt reply.I already try your advice, but it didn't work. I assume it didn't work because 4 disks at enclosure 2 still ini LEFTOVR status or should I...
View ArticleRe: Need help MSA 2040 + DS2700 HDD QTOF & LEFTOVR status
Please remove the outputs as you shouldn't place any serial number for any of the device in public forum.Don't even think of clearing metadata until log analysis done in detail by HPE support. As the...
View ArticleFrequently Searched and Consumed Technical Content on HPE Portal
HPE Pointnext is focused on improving customer experience through self-solve.HPE knowledgebase empowers customers with online solutions like never before!To further enhance the customer experience...
View ArticleHPE MSA- Frequently Searched and Consumed Technical Content on HPE Portal
HPE Pointnext is focused on improving customer experience through self-solve.HPE knowledgebase empowers customers with online solutions like never before!To further enhance the customer experience...
View ArticleHP P 2000 G3 ISCSI
hi,I have an issue with my HP P2000 G3 the device has 4 ISCSi port and 2 controllers, when I try to ping the IP of the controller A or B it's not replaying even when I am directly connected to the...
View ArticleRe: HP P 2000 G3 ISCSI
Hello Mustafa,It sounds as if your controllers are fine but you are instead having a network issue. Since you have console access you might want to try the following.1. Can you ping one controller MC...
View ArticleRe: MSA2324i vDisk Rebuild Problem
Thanks for you assistance.I think I have at least 3 faulty disks as it shows the same error with different serial numbers :There is a problem with a FRU. (FRU type: disk, enclosure: 1, device ID: 3,...
View Article