Re: Critical Firmware Upgrade Required For Certain MSA SAS Solid State Drive...
Shawn, Thanks for the link, however, the link shows how the SSA can tell you how long the SSD's have been running, not help find these SSDs in an environment. If OneView can't do it, there's got to be...
View ArticleRe: What are the methods to find SSDs?
We have checked it in our ERP System to find the affected Servers and Storage Systems.Our Accounting needs only a minute fo find them.
View ArticleRe: Allocated snapshot space exceeded the configured limit
The initial replication of 4Tb LUN completed successfully yesterday.I ran a scheduled subsequent replication to cathc up on all the changes.After 20 mins it logged a warning messageAllocated snapshot...
View ArticleRe: Allocated snapshot space exceeded the configured limit
It is the remote system that is showing these errors. From the CLI the show snapshot-space gives us.login as: manageUsing keyboard-interactive authentication.Password:HPE MSA Storage MSA 2050 SANSystem...
View ArticleRe: Allocated snapshot space exceeded the configured limit
It's really difficult to answer your queries as there are many data missing in terms of both MSA systems like both Array Pool size, how many volumes, each volume size, how much space set as limit for...
View ArticleRe: HPE MSA 2050 Warning - Host link down. (port 2)
You can check below commands,show systemshow ports detailMostly one controller Host port 2 link is down. If this is continuously down then you should check network connectivity between this Host port...
View ArticleRe: Allocated snapshot space exceeded the configured limit
Many Thanks for your help so farThe output from# show replication-snapshot-historyName Snapshot History Count Snapshot Basename Retention...
View Articledirect connection between MSA2040 and MSA2050
hi Communityfor replication purpose, I should do a synchronous replication between MSA2040 and 2050 ,unfortunetly my client hasn't the budget to purchase a switch SAN it's possible to have a direct...
View ArticleRe: Allocated snapshot space exceeded the configured limit
It will be difficult to explain everything here but let me try.As per the output of command "show replication-snapshot-history" we see that there are two replication set. Out of which...
View ArticleRe: direct connection between MSA2040 and MSA2050
Refer Page no 13 of below White Paper,https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA1-0977ENW.pdfTwo arrays are required. All arrays should have all reachable ports configured and connected via a...
View ArticleRe: Allocated snapshot space exceeded the configured limit
Many thanks for this.It starting to make sense now. I am guessing as I will need to start replicating approx another 5Tb over an additiional 2 * 4TB LUNs that we should adjust the limit setting to be...
View ArticleRe: Allocated snapshot space exceeded the configured limit
See Source Array initially not much snapshot space required for 1st replication because Volume data and snapshot point to same LBA from same Pool of space. That's why no extra space required for source...
View ArticleRe: direct connection between MSA2040 and MSA2050
And of course, the MSA did not Support a Synchronous Replication.Only asynchronous is possible.Take a look at...
View ArticleRe: Allocated snapshot space exceeded the configured limit
It is making sense now.I have increase the snapshot limit setting t0 30% for the moment.We have scheduled replication set to start at 18:00 - I will monitor the situation.
View ArticleRe: direct connection between MSA2040 and MSA2050
Can you please help us to understand if the issue got resolved or not?If issue got resolved then how?Also request you to mark the forum as resolved if there is no more outstanding query from your end...
View ArticleRe: P2000 G3: adding a new disk as spare fails
Bernd ,From the screen shot and details shared. I see that you have configured disk 2:25 as dedicated spare. Further events reports there are no spares and the disk 2:25 has failed.Please let me know...
View ArticleRe: P2000 G3: adding a new disk as spare fails
Hello Bernd,I have seen this type of behavior before where you add a new drive in as a spare, the spare gets assigned to the Vdisk, reconstruction starts, and then the spare fails. If your drive is...
View ArticleMSA Opearting Systems
Hello Can anyone tell me what operating system run under the MSA1040 "it's means internally"Thanks in advanced.JJAP.
View ArticleMSA2050 threshold warning - the overcommit is not enabled
Hi HP people and users!I have a problem with HP MSA2050, giving kernel errors on server about "thin provisioning soft threshold reached". But the "overcommit" is disabled.The space reported as used by...
View Article