Re: HPE MSA 2050 Storage Capacity not refreshed in Server 2016 after removing...
Mr. Subhajit, thank you. As you suggested,1. backed up the data first2. remove entire disk group3. recreate disk group , volume , and mapping4. solvedHave a nice day.
View ArticleRe: MSA 2040 disk spare failed
Yes you can move any spare drive from one location to other location and for that no downtime required. Our objective is to identify if any issue with slot 1.14 Hope this helps!RegardsSubhajitI am an...
View ArticleBest RAID Setup for MSA 2050
Hi everyone,We need suggestion about RAID on MSA 2050currently we have 8 SAS x 900GB and we setup it as follow:7 SAS as RAID 5 and 1 SAS as Global Spare.is it safety? Some said RAID 5 was very...
View ArticleRe: MSA 2040 disk spare failed
I moved spare disk from workin slot to 1.14. Disk filed after moving in slot 1.14 Second problem is that when I moved disk spare to his orginal slot he failed. How to reset disk to factory reset and...
View ArticleClik here to view.
Re: MSA 2040 disk spare failed
At this point it looks like slot 1.14 is bad for which you may have to replace the Chassis.If the drive back to it's original slot and shows as failed then only option is to physically re-seat the...
View ArticleRe: Best RAID Setup for MSA 2050
RAID you need to configure based on your requirement and capacity to afford this. MSA2050 supports RAID 1, 5, 6 and 10Now RAID 1 and 5 VDG both can sustain upto one drive failure. In case of RAID 6...
View ArticleRe: MSA 2040 disk spare failed
How to re-seat the drive to get proper state of the drive.?In another system disk works, is ok.If I replace the chassis the configuration array will be lost? I have two controllers.
View ArticleSAS problem MSA2000 G3
Hi,We had a power problem in enclosure 3 of our MSA2000 G3After replacement of the power, we now have an issue with the SAS cannelsWe see the followingUnhealthy Component-------------------Component...
View ArticleRe: MSA 2040 disk spare failed
You just have to physically remove the drive from the slot. Half of the slot or bay is enough. Give 1min and then put it back.Then check in CLI and SMU about the state of the drive.As you have...
View ArticleRe: MSA 2040 disk spare failed
Hello,If the disk works in another system then there are a couple of steps you can take.Both your array and your drives need upgrading. There are several drive types that have a critical firmware...
View ArticleRe: SAS problem MSA2000 G3
Hello,Due to the power issue you may have either caused the backend SAS map to be rebuilt or incorrectly scanned. There are a couple of things you can try.Check and verify the cables are correctly...
View ArticleExpand 2-tier, one pool MSA 2052
Hi.Need to add more disk for more preformance to our MSA 2052.Current setup: 2-tier, 1 pool only (A)6 800GB SSD RAID6 (no spare) (HPE MSA 2052 SAN Dual Controller SFF Storage)10 4TB MDL RAID6 + 2 spare...
View ArticleRe: MSA 2040 disk spare failed
Hi, Remove drive from the slot and wait 1 min and put in back nothing change. Disk still failed. In MSU state drive is failed.
View ArticleRe: SAS problem MSA2000 G3
gehter with HPE we isolated the problemOn two IO Modules we found a SAS channel being disabled due to internal errors, so instead of 4 active channels per port there were only 3. One module had an...
View ArticleHP MSA 2050 remove disk group and vdrain
Hello!I have 3 disk groups on my MSA 2050 and going to remove 1 group. I do it by the way that described in manual and VDRAIN process starts. So, all data from removing disk group not going to be...
View ArticleRe: HP MSA 2050 remove disk group and vdrain
Hello,If the disk-group has data in it, then the VDRAIN process will automatically occur. There is no option to enable or disable VDRAIN. VDRAIN moves the data becuase the volume associated with the...
View ArticleResetting the password on MSA1050
Hello,I have tried RESETUSER and RESTOREDEFAULTS logins with the SN on the controllers but the login does not work. Has anyone been able to sucessfully do this on an MSA1050?Thanks!
View ArticleRe: Resetting the password on MSA1050
Hello,You may have already tried all of this but since you did not list all your steps I am going to cover what I see is missing from your post.You must be directly connected to the array for this...
View ArticleRe: Resetting the password on MSA1050
Shawn,Thanks for the reply I just tried again from the console, it will not accept either serial number for the password.Calling support. Will update.
View ArticleRe: HP MSA 2050 remove disk group and vdrain
Dear Shawn,I don't know about evzar's MSA 2050 setup areBut I also want to ask, since I am also new for MSA 2050, for example the setup aredg1, 3 SAS with RAID 5 in Pool Adg2, 3 SAS with RAID 5 in Pool...
View Article