Re: ESXi Host unable to see LUN on MSA 2050
Hi,Make sure Iscsi initiator name does not have any uppercase letter involve.if there is any select the vmhba, go to its properties, then under general tab>configure tab and then reconfigure iSCSI...
View ArticleRe: HP P2000 MSA downgraded error
Hi ,As per your current FW code which you said T250 , from here you can directly upgrade to latest FW code which is TS252.And for Compact Flash Card error(CF) , just do a single reboot of the...
View ArticleRe: MSA 2040 CLI cannot connect
Hi,Was this issue ever resolved? We have the exact same issue, SAN is not pingable and cannot access both controller via the cli ports. Have tried 2 different driver versions (1.0.4.11 & 1.0.5.17)...
View ArticleRe: MSA 2040 CLI cannot connect
If you are trying to ping MSA controller then that should be related to management port but you have mentioned USB driver update fail. Are you trying to connect CLI port ?I would suggest to follow the...
View ArticleRe: MSA 2040 CLI cannot connect
Hi Subhajit,Thanks for the reply. We have tried all those troubleshooting steps and the management interface/cli is still unavailable.
View ArticleRe: MSA 2040 CLI cannot connect
Is production up ?It seems MSA management controller not able to talk to Storage Controller. If you are unable to access Controllers through any interface then there is no other option but to restart...
View ArticleRe: MSA 2040 CLI cannot connect
Yes the storage is up and accessible. I will restart the controllers when able , thanks for your help
View ArticleRe: HP P2000 MSA downgraded error
Hi,Thank you for the response and solution as well, I tried to download the firmware from HPE website but it required active SAID which I don't have either one of my servers is in warranty and I linked...
View ArticleRe: HP P2000 MSA downgraded error
HPE stopped giving driver/firmware without having valid active Contract ID with HPE. There is cost involved to produce driver/firmware as well. So in order to get them people who are using HPE products...
View ArticleRe: ESXi Host unable to see LUN on MSA 2050
Hiif the host has no Luns from MSA at the moment you can delete thehost on the MSA and let the MSA discover it.Also sometimes if the mapping is part of a host group there are problemstry to map LUN...
View ArticleRe: IOPS, latency, throughput calculation (in case msa 2052)
Hi ,All you answers related to performance is mentioned in the below link , which is a quickspec guide for MSA2052.Kindly refer page number 9 and 10 thoroughly .Once you have the setup ready , as per...
View ArticleRe: IOPS, latency, throughput calculation (in case msa 2052)
Thank you for your answer. However I still don't understand how to calculate mixed config, because those tests are made with only ssd or only hdd. So If I would like to set up a system which capable of...
View ArticleClik here to view.
Confused about MSA 2050 config
Apologies for this if I am missing something, but: I've got an MSA 2050 connected via SAS to a ProLiant DL380 gen10.I have looked at the Best Practice Guide and the MSU Guide but I cannot work out how...
View ArticleRe: HP StorageWorks MSA-P2000 G3 SNMP monitoring (snmpwalk)
Have you ever found the correct OID's?Marcel
View ArticleRe: HP P2000 MSA downgraded error
This is not good for IT Admins, especially who is taking care of HP Devices without an active contract cannot even upgrade the firmware. I am searching the Compact Card for purchasing, if you can share...
View ArticleRe: HP P2000 MSA downgraded error
Not sure about direct sales contact but you can check the below link to get Storage sales contact or you can use Live Chat option,https://www.hpe.com/in/en/contact-hpe.htmlRequesting others if you have...
View ArticleRe: ESXi Host unable to see LUN on MSA 2050
I did notice that the iSCSI Software initiator did have capitals in the name which included the ESXi host name in the initiator. I didnt see this post till after but I ended up disabling (removing)...
View ArticleRe: HP P2000 MSA downgraded error
Hi Kashif,You can reach our pre-sales team using this link HPE Sales Chat and they will be able to assist you. Alternatively you can look for re-seller partner here for GCC.Also find the Support...
View ArticleHow to change retion priority on MSA2040 snapshots
Hello,A customer cannot delete some old snapshots. When checking the log file I see this for the status of snapshotsA VSS170828204859249 2017-08-28 21:47:01 Available N/A Pool_A_CSV01 Pool_A_CSV01 0 8...
View Article