Re: i cant config my hp p2000 NIC to connect G7
Check the below links which may help you,https://kb.vmware.com/s/article/1448?lang=en_UShttps://boerlowie.wordpress.com/2010/09/03/recommended-bios-setting-on-hp-proliant-dl580-g7-for-vsphere/You can...
View ArticleRe: MSA2040 multipath config
Hello Raphael,Can you please help us to understand if the issue got resolved or not?If issue got resolved then how?This will help for everyone who are all following your forum. If you feel this was...
View ArticleRe: i cant config my hp p2000 NIC to connect G7
i have one LUN . did san storgae has a configuration for boot from san by fc and HP G 7i dont know what to do
View ArticleRe: i cant config my hp p2000 NIC to connect G7
can u show me san storage config for this
View ArticleRe: i cant config my hp p2000 NIC to connect G7
There is nothing special from Storage end. It's same like how you present volume to a host. Adding a host. Then create a volume and present it through Host ports to the Host.Now at the Host or server...
View ArticleRe: MSA2052 + 2 additional shelves Pool setup
Thank you Shawn and Subhajit. Sorry, I was not working over the weekend so I started configuration today.I went for Option 2 with a big Pool A and a smaller Pool B, both having the 3xSSD Raid 5.Now we...
View ArticleRe: i cant config my hp p2000 NIC to connect G7
Hello,Your post keep stating you want to connect the P2000 to your NIC. Yet the screen shot shows a FC HBA. These two protocols do not connect without something special inbetween that may not be...
View Articleconnection with DS8886
Which is the firmware for the HP B-series 8/12c Blade System SAN Switch to connect to IBM DS8886 storage
View ArticleConfiguring network on MSA2050
HiI am unable to configure network settings via SMU on MSA2050.I want to apply a static IP but it always comes back to factory settings (dhcp, 10.0.0.2).I have tried on different browsers. Same...
View ArticleClik here to view.
SAN MSA1000 SANSurfer Express not launch
Hi, We have this hardware: SAN: HP StorageWords Modular Smart Array 1000 with Fibre Channel I/O Module.MSA (MSA1000, 2 controllers) <-> SWITCH <-> HBA: SERVIDOR (ML350 G5) When we load...
View ArticleRe: Configuring network on MSA2050
Hi there, So you cannot estabilish connection on MSA, can you try to rest controllers to factory defaults: restore defaults factory command on CLI. Then once when you will put set network-parameters ip...
View ArticleRe: SAN MSA1000 SANSurfer Express not launch
Hello, The MSA1000 was never tested, configured, or designed to work with SANSurfer. You will need to stick with HP ACU (CPQACU) to manage the array.Also, just so you are aware. THE MSA1000 went End of...
View ArticleMSA 1050/ SMTP server can not be set up for Office 365
Hi all, i^m having the problem that the SMTP server for email notifications for MSA 1050 can not be set up for office 365. There is onlz option for IP address, which is not available after the...
View ArticleRe: MSA 1050/ SMTP server can not be set up for Office 365
May I know how you have configured in MSA1050 SMU? I hope you have followed SMU user guide. Try to provide as much details possible regarding configuration along with screenshots.Also would like to...
View ArticleSAN (P2000 G3 iSCSI) Vdisk Raid5 offline
Hi, I have a serious problem with the Vdisk on SAN (P2000 G3 iSCSI) , it configured with RAID 5 : System Name: SANSystem Contact: IT ManagerSystem Location:System Information: HP P2000 G3Midplane...
View ArticleRe: SAN (P2000 G3 iSCSI) Vdisk Raid5 offline
You shouldn't try trust command without checking logs by some MSA specialist. If you have contract with HPE then log a support case with HPEHow vd01 went to offline state?You can also check system...
View ArticleRe: SAN (P2000 G3 iSCSI) Vdisk Raid5 offline
Bundle Version: TS230P008It looks like this MSA running with very old or expired or inactive firmware so there is no gurantee that Vdisk will come up or not.Three drives at location 1.2, 1.11 and 1.12...
View ArticleRe: SAN (P2000 G3 iSCSI) Vdisk Raid5 offline
I forgot to mention that you need to physically re-seat drive at location 1.10 then only you can try the commands that I have suggested because 1.10 now missing and that is the last drive for which...
View ArticleRe: SAN (P2000 G3 iSCSI) Vdisk Raid5 offline
it s not working : # trust enableSuccess: Command completed successfully.# trust vdisk vd01Error: Command failed.
View ArticleRe: SAN (P2000 G3 iSCSI) Vdisk Raid5 offline
Is 1.10 now detected by controller?As told you before there are multiple drive having issue which will not allow to recover the vdiskYou can log support case with HPE if they can recover Hope this...
View Article