I mean show vdisk command, show the number of disks is 8 not the number of vdisk is 8
# show disks
Location Serial Number Vendor Rev How Used Type Size
Rate(Gb/s) SP Status
-----------------------------------------------------------------------
1.1 3QN2BZRN00009011AGF2 SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
1.2 3QN2AYRG00009010RM0Z SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
1.3 3QN29G8D00009010QNV3 SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
1.4 JFVWNM6C HITACHI A410 VDISK SAS 146.8GB
3.0 A OK
1.5 3QN2A33000009011L3HD SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
1.6 3QN2A33F00009011L3EG SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
1.7 3QN2BZSJ00009011AE1Z SEAGATE 0004 VDISK SAS 146.8GB
3.0 A OK
-----------------------------------------------------------------------
#
# shw
Error: The command was not recognized.
# show vdisk
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs
Serial Number
-------------------------------------------------------------------------
vdisk1 586.6GB 608.5MB A A RAID10 8 0 64k CRIT
00c0ffd8e3460000e7662f4b00000000
-------------------------------------------------------------------------
#