Yes you are correct. I have also noticed random drives shows Queue Depth as 8000 which doesn't looks like right values. This is already covered in release notes under "Issue/Workaround" section. Not specifically as "Queue Depth" value but like this,
"Issue: After adding disk-groups, the performance charts displayed in the SMU show incorrect data.
Workaround: Gather disk statistics using the CLI or reset the performance statistics.
"
This is mainly you see when you check historical disk statistics value.
I would suggest to always check live data when you are measuring performance. It can be per disk or as part of disk-group if you check for individual drives.
Also better to check Host port statistics live Queue depth as well.
Hope this helps!
Regards
Subhajit
I am an HPE employee
If you feel this was helpful please click the KUDOS! thumb below!
******************************************************************************
