Im trying to upgrade drives in an MSA2040 and Im getting error -210. All host IO is down
Uploading firmware component
Uploaded 1MiB.
Uploaded 2MiB.
Uploaded 3MiB.
Starting docodeload: Tue May 5 19:46:01 UTC 2020
Updating selected disk(s) with the provided firmware file.
Fetching disk information from the Storage Controller.
1 disk(s) will be updated.
Attempting to reserve the Storage Controller buffer. This could take a while. (controller = A)
Sending firmware to Storage Controller buffer. (controller = A)
Sending Image:Remaining size 4169728
Sending Image:Remaining size 4005888
Sending Image:Remaining size 3842048
Sending Image:Remaining size 3678208
Sending Image:Remaining size 3514368
Sending Image:Remaining size 3350528
Sending Image:Remaining size 3186688
Sending Image:Remaining size 3022848
Sending Image:Remaining size 2859008
Sending Image:Remaining size 2695168
Sending Image:Remaining size 2531328
Sending Image:Remaining size 2367488
Sending Image:Remaining size 2203648
Sending Image:Remaining size 2039808
Sending Image:Remaining size 1875968
Sending Image:Remaining size 1712128
Sending Image:Remaining size 1548288
Sending Image:Remaining size 1384448
Sending Image:Remaining size 1220608
Sending Image:Remaining size 1056768
Sending Image:Remaining size 892928
Sending Image:Remaining size 729088
Sending Image:Remaining size 565248
Sending Image:Remaining size 401408
Sending Image:Remaining size 237568
Sending Image:Remaining size 73728
Sending Image:Remaining size 0
Loading firmware on 1 disk(s).
Started loading firmware on disk 1.1. (controller = A, target = 00:000)
Failed loading firmware on disk 1.1. Unknown error. (controller = A, target = 00:000, error code = 0)
1 of 1 disks failed to load. (error code = -210)
CAPI error: An error was encountered updating disks.
*** Code Load Fail. Failed to successfully update disk firmware. ***
