Please find the steps to disable VRSC or scrub for vdisk,
To configure background scrub for vdisks
1. In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities.
2. Set the options:
Either select (enable) or clear (disable) the Vdisk Scrub option. This option is enabled by default.
Set the Vdisk Scrub Interval (hours) option, which is the interval between background vdisk scrub finishing and starting again, from 0–360 hours. The default is 24 hours.
3. Click Apply.
I wouldn't suggest to disable Vdisk Scrub option. Scrub actually what is does -> system continuously analyzes disks in vdisks to find and fix disk errors.
You have another scrub option for disks which are not part of vdisks as well.
To configure background scrub for disks not in vdisks
1. In the Configuration View panel, right-click the system and select Configuration > Advanced Settings > System Utilities.
2. Either select (enable) or clear (disable) the Disk Scrub option. This option is disabled by default.
3. Click Apply.
Any scrub option is important with respect to find drive errors and fix them.
Hope this helps!
Regards
Subhajit
I am an HPE employee
If you feel this was helpful please click the KUDOS! thumb below!
****************************************************************************