Hello,
One of two ProLiant DL 360 Gen9 (exactly same HW setup) servers is spaming event log with error 129, 153 and 5008. Main problem is, that VMs are freezing on this node from cluster and it is not possible to work with them. Source of MPIO is MSA 2040.
NODE A is the problematic one, lets asume there are no VMs running. When I move 1 VM to NODE A, errors start showing up (129, 153, 5008). When I move that VM to another node (good one) no more errors shows up at NODE A.
Then Cissesrv 24607 appeared:
"The event information received from array controller H241 located in server slot 2 was of an unknown or unrecognized class.
An excerpt of the controller message is as follows: Phy Err Thresh Exceeded, DeviceType=254 Port=2E Box=0 Bay=0."
So I started updating all and NODE A, leaving NODE B as it is since it is working well.
NODE A running Win2012R2, System Rom: P89 v2.76 (10/21/2019).
HBA H241 driver: 106.26.0.64
Smart Array P440ar Controller: 106.26.0.64
Found this solution for error 129 and 5008 https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c04584498 but why uninstall WBEM when on other server it is working well?
I would apreciate any help. Thank you! Jaromir
