The setup which you have currently is not perfect because this is not fully redundant setup.
Currently on the MSA 2050, we are connecting FC port 1 to the switch 1 , and FC port3 to the switch 2, the same connection for both controller.
According to the Best practices, we need to connect FC port 1 and FC port 3 on switch 1, and FC port 2 and FC port 4 on switch 2, to get the redundency,
We would recommend you to follow the best practice guide as this is giving you fully redundant setup. On top of that to remind you, you need to present volume with all host ports and configure multi-path at the host end with the help of multi-path software.
Hope this helps!
Regards
Subhajit
I am an HPE employee
If you feel this was helpful please click the KUDOS! thumb below!
*****************************************************************************