Hi Subhajit, sorry for the long delay in my answer, i was in a hurry with other tasks.
Servers are 2 x HP DL380 G10, each with 1 x S4110 Intel processor, 96 GB of ECC HP RAM.
HBA are 2 x E208e-p per server, cables are - as you said - are ok.
Here you can find each firmware as reported by the ILo interface:
(firmware name firmware version Location)
iLO 5 1.40 Jan 29 2019 System Board
System ROM U30 v1.46 (10/02/2018) System Board
Intelligent Platform Abstraction Data 7.2.0 Build 30 System Board
System Programmable Logic Device 0x2A System Board
Power Management Controller Firmware 1.0.4 System Board
Power Supply Firmware 1.03 Bay 1
Power Supply Firmware 1.03 Bay 2
Innovation Engine (IE) Firmware 0.1.6.1 System Board
Server Platform Services (SPS) Firmware 4.0.4.393 System Board
Redundant System ROM U30 v1.46 (10/02/2018) System Board
Intelligent Provisioning 3.20.154 System Board
Power Management Controller FW Bootloader 1.1 System Board
HPE Smart Storage Battery 1 Firmware 0.70 Embedded Device
HPE Eth 10Gb 2p 535FLR-T Adptr 20.08.0401 Embedded ALOM
Network Controller 20.12.41 Embedded LOM
HPE Smart Array P408i-a SR Gen10 1.66 Embedded RAID
HP Ethernet 1Gb 4-port 331T Adapter 20.8.41 PCI-E Slot 1
HPE Smart Array E208e-p SR Gen10 1.04 PCI-E Slot 2
Embedded Video Controller 2.5 Embedded Device
Hope this helps, thanks in advance for your support.
Asst-DGM