Hello All,
I have one HP MSAP2000 G3 FC Storage with 18 populated disks in one enclosure. However we have following disk utilized for each vDisk as mentioned on below.
vd01 ( RAID 5 ) => 1.2/1.3/1.4/1.5/1.6/1.7/1.8/1.9/1.10/1.18
vd02 ( RAID 5 ) => 1.11/1.12/1.13/1.14/1.15/1.16/1.17
Available Disk : 1.1
Problem : Disk Location 1.1 was got replaced recently. We are unable to make it Disk 1.1 as Global Spare. However it is again available status after few seconds after made it as Global Spare.
Taken Action :
(1) 1.1 Disk Health is OK State and this disk details are mentoned on below. Even we do have it with many more disks in the same enclosure.
Model: EG0600FBDSR | Revision : HPD4 Revision | Size : 600 GB | Type : SAS
(2) I have created new vdisk (vd03) with the problematice disk (Disk location 1.1) with NRAID Option and even created a volume too which was created successfully wihtout any issues then I have destrored it temporary created vd03. I thought that again tried to make as Global Spare but it has again available in few seconds.
(3) I have all these tasks through manage user
Installed Firmware :
Bundle Version : TS240P004-02
Storage Controller Version : T240P02-01
Suspection :
Maybe there is some issue with known bug in the above bundle version which may cause the issue