Hi guys,
I have connected directly (iscsi, dac cables) 2 servers with vmware 6.5 to my storage, server1 to ports A1 B1 and server2 to ports A2 B2, on array i have one pool on a Storage A.
In vmware i have configured vSwitch with 2 vmkernel and iscsi software adapter, path policy is round robin and I see from each server 2 path but one of them is Active and the other is Active (I/O).
Failover is working properly, but I was thinking that this array is Active/Active, and with mpio host should use all avaible path to array, but from my testing it using only one vmnic (one path) at the same time.
I assumed that I would be able to utilize 2 10Gbps connections from every host, by connecting them to 2 controllers A and B, and both controllers works simultaneously.
How to connect 2 servers to array to use Active/Active mode and have link with more than 10Gbps?
Any suggestions would be great
Thanks