Hello,
If you recently installed a new drive(s) from another array, try removing those drives, install them in the old array, and delete the vdisk/disk-group/pool. Once the vdisk/pool has been deleted you can then install the drives into the MSA2050.
If you are unsure of which drives contain the Pool you want to remove, then please log an HPE Support case. You have to be careful when deleting pools, that you do not delete the pool that you currently are using and have active data on.
To open a support case with HPE Support using the following web link, if the unit is under warranty: https://support.hpe.com/hpesc/public/home
If the unit is out of warranty, you can open a chat support case with HPE using the following web link to check for options: https://pg-receiver-pro.glb.itcs.hpe.com/WCLWeb/WCLEntry.aspx
Cheers,
Shawn
I work for Hewlett Packard Enterprise. The comments in this post are my own and do not represent an official reply from HPE. No warranty or guarantees of any kind are expressed in my reply.