Hi all
We have strange behavior of MSA P2000 FC - 24disks SAS 900GB
Rcently i upgraded firmware to TS252P001 and all disks to HPD8 (most of them:EG0900FBLSK)
After some troubles with firmware update of disks i decided to stop both storage controllers
after command:
shutdown both
storage controller B was disabled
and i got such info: that controller A is in inapropriate state do be disabled
after show vdisks i got this info: (see attachement)
# show vdisks
Name Size Free Own Pref RAID Disks Spr Chk Status Jobs Job% Serial Number Drive Spin Down Spin Down Delay Health Health Reason Health Recommendation
-------------------------------------------------------------------------------------------------------------------------------------
vd01 17.9TB 985.3GB A A RAID50 22 1 640k FTOL VRSC 73% 00c0ff158216000082a2d15500000000 Disabled 0 OK
-------------------------------------------------------------------------------------------------------------------------------------
Success: Command completed successfully. (2016-06-17 09:45:46)
...and this VRSC job is in the same 73% progress since 20 hours
after command:
abort scrub vdisk vd01 i got nothing
what can I do i such situation?
Should I simply unplug power cables?
Thanks in advance
best regards
--
Artur Dębski
http://blogit.one.pl
