Hello and thanks for this excellent forum!
I am helping in the management of an HP MSA P2000 SAN and have an issue with one of the vDisks.
This vDisk is configured in a RAID 6 and recently lost one of its disks. We contactly a widely known hardware reseller and obtained a replacement disk for it that was deemed compatible by the reseller.
When I removed the bad disk and inserted the new disk, I logged into the SMU and saw that the RAID was rebuilding. Knowing that this usually takes some time, I logged off and made a note to check on it the next day.
Well, my counterpart notified me that the drive had not turned green the next day and when I logged into the SMU, the vDisk is still showing as a "Degraded" state. Also, now the drive which is inserted into Controller 1, Slot 10 is now missing and not showing up as an available drive any longer.
I have attached a screenshot of the error log from the rebuild process. You can see clearly on there that the rebuild did encounter an error, but I don't know what to do next and certainly don't want to continue running in a degraded state.
Thanks in advance for any support that you can provide. See attached JPG for the error/warning log.